Delta Servo Drives
Delta Servo Drives
Delta ASDA servo drives cover motion applications from packaging and feed axes to multi-axis robots and CNC spindles. If you have a drive, use the complete nameplate model code to find its series below. For a new axis, select the servo drive, servo motor and cables as parts of one system.
A2 and A3 series
Delta ASDA-A2 · Positioning and motion functions. Command inputs, CANopen and DMCNET options vary by drive model.
Delta ASDA-A2-E · EtherCAT axes. The A2-E manual covers network wiring and commissioning.
Delta ASDA-A2R · Higher-power A2 family. Check the supply class and motor pairing in the A2R table.
Delta ASDA-A3 · Advanced motion control. Check the complete code for ECM-A3L or ECM-A3H motor pairings and the drive command interface.
B2 family and B3
Delta ASDA-B2 · General-purpose servo applications. ECMA motor pairings, command inputs and cable tables.
Delta ASDA-B2-F · DMCNET variant. See the B2-F manual for CN6 and controller compatibility.
Delta ASDA-B2L · ECM-E2M motor pairings and cable options from Delta’s B2L table.
Delta ASDA-B3 · General-purpose servo family. Check the full variant for motor, encoder and command interface selection.
Multi-axis systems and spindles
Delta ASDA-M · Three servo axes in one housing for coordinated and synchronized motion.
Delta ASDA-MS · Robot controller with integrated servo drives. Robot applications, axis connections and series catalogue.
Delta ASDA-S · CNC spindle drives. ECMS motor pairings and model-specific braking resistor or C-Box options.
Maintenance and spares for older machines
Delta ASDA-A · Legacy installation, model identification and maintenance documentation.
Delta ASDA-A+ · A+ drive codes, installation sheet and shared A/A+ manual.
Delta ASDA-AB · ECMA motor combinations, supply codes and Pt/Pr control.
Delta ASDA-B · Legacy B-series drives, ASD-PU keypads and CN3 connection documentation.
Selecting the drive and motor
When matching a drive and motor, start with the complete drive code and supply class. For motor selection, check rated power, speed, load inertia, flange and brake option together. The encoder code, absolute position requirement and feedback cable affect compatibility. Record the PLC command interface and any RS-485/Modbus settings separately.
Editor’s Note
1. Ask for drive, motor and cable labels when buying used equipment. During the maintenance inspection, check the connectors and fan condition. Save the drive configuration before replacement.
2. Compare command scaling with actual travel for positioning errors. Record the electronic gear ratio, homing sequence and limit switch settings. During a controlled test, measure the travel produced by a known position command.
3. Record speed and load when a fault occurs on stopping. Deceleration time and load inertia affect regenerative energy. Verify the braking resistor against the exact drive model’s table.
4. Open the safety and wiring drawings for the exact model. For STO, follow the variant’s safety diagram. For panel checks, verify grounding and signal cable routing against the wiring documentation.
5. Record the complete alarm code and when it occurs before resetting it. Note whether it appears at power-up, at servo enable or while stopping under load. Use the troubleshooting table for the exact series and revision.
Manuals and alarm tables
Delta Servo Manuals and PDF Archive · Find user manuals, catalogues, motor combinations and wiring diagrams. For alarm codes, use the troubleshooting chapter of the manual for the matching series.
ASDA-B archive manual (PDF, English) · ASDA-B2 archive manual (PDF, English)
Motors, accessories and controllers
Delta servo motors · ECMA · ECM-A3L · ECM-A3H · ECMS spindle motors
Servo modules and accessories · Servo cables · Power connectors · Communication units
Motion control cards · Delta AS PLC · Delta AH motion controllers · Used Servo Drives