Delta ASDA-A2
Delta ASDA-A2 Servo Drive
Delta ASDA-A2 is an AC servo drive family available in 220 V and 400 V classes for Delta ECMA servo motors. In feeding, indexing and synchronized cutting applications, the supply class, motor code and machine command interface all determine which drive to use.
Supply and motor matching for 750 W models
The ASD-A2-0721-□ is a 750 W drive in the 220 V class. Delta lists the ECMA-C△0807□S as one matching motor. The ASD-A2-0743-□ is a 750 W drive in the 400 V three-phase class with different listed motors, including the ECMA-J△0807□S. When selecting a motor, check the complete code for frame, shaft and brake options.
The △ in the motor code identifies the encoder type. On the relevant ECMA models, Delta uses 1 for 20-bit incremental, 2 for 17-bit incremental and A for an absolute encoder. Verify feedback compatibility using the complete motor code and the CN2 encoder cable.
A2-L, A2-U, A2-M and A2-F variants
A2-L and A2-U offer pulse and analog command inputs. A2-U also supports CN7 digital input expansion. A2-M provides CANopen, A2-F provides DMCNET and A2-E is the EtherCAT variant. If the machine uses RS-485/Modbus, check CN3 support against the complete drive code.
Pt, Pr and electronic cam
In Pt mode, the PLC or motion controller sends the position command as an external pulse train. P1-00 defines the input pulse format, and P1-44/P1-45 define the first electronic gear ratio. After replacing the drive, compare actual axis travel with the commanded distance to check positioning accuracy.
In Pr mode, motion paths are defined in the drive. P5-07 can trigger homing or a selected Pr path. On E-Cam-capable variants such as A2-U and A2-M, the follower axis tracks a cam profile based on the master axis position. Identify the analog and digital command signals, the home sensor and the travel limit switches separately on the wiring diagram.
Editor’s Note
1. Get the final suffix on a used-unit quote. Two A2 drives with the same power rating can have different networks and command interfaces. Ask for the drive, motor and cable identification together. During the inspection, look for damaged connector latches, motor shaft play and signs of oil ingress.
2. Preserve the motion paths on a Pr machine. When backing up the drive configuration, capture the P6/P7 path parameters, input assignments and homing settings. If the machine uses E-Cam, save the cam table and its engagement conditions as well.
3. Check scaling first when travel is wrong. For a Pt axis, compare the pulse format and electronic gear ratio with the original settings. Verify travel direction, commanded distance and mechanical backlash before changing loop gains or running auto-tuning.
4. Check CN5 on an axis with a linear scale. Before replacing the drive, record the external feedback direction, scaling and control mode. If the application combines Pr and full-closed-loop control, check the A2-F requirement in Delta’s manual.
5. Start at CN2 for AL011. Save the alarm history from P4-00–P4-04. With the system safely isolated, inspect the encoder connections at the drive and motor. For intermittent faults, also check grounding, cable shield termination and signal cable routing.
6. Record the conditions of a stopping fault. Note the load and the deceleration time when the alarm occurs. If it involves regenerative energy, compare the braking resistor with the table for the exact drive model.
User manual and series catalogue
Delta ASDA-A2 User Manual (PDF) · English, 11 January 2024, 781 pages. See Chapter 1 for model and motor matching, Chapter 3 for wiring, Chapter 7 for Pr and E-Cam, and Chapter 10 for alarms.
Delta ASDA-A2 Series Catalogue (PDF) · English, 14 February 2023, 72 pages. Covers drive variants, ECMA motor selection, dimensions and cable part numbers.
Related Delta equipment
Delta ECMA motors · Servo cables · Encoder connectors · Servo I/O connections · Servo braking resistors · Motion control cards
Delta ASDA-A2-E · Delta ASDA-A2R · Delta ASDA-A3 · Delta ASDA-AB · Delta AS PLC · Delta AH motion controllers
Delta Servo Manuals · Delta Servo Drives · Used Servo Drives