Delta Encoder Connectors

Delta Encoder Connectors – Drive CN2 and Motor End

Delta encoder connectors terminate the cable that carries servo motor position and speed feedback to the drive’s CN2 input. Start with the complete motor code, complete drive code and the cable end you need. The motor-end connector and drive-end CN2 plug are separate parts. See Delta servo cables for complete cable assemblies and Delta servo power connectors for motor power and brake connections.

ASDA-A2 and ASDA-B2 motor-end part numbers

The ASDA-A2 catalogue lists ASD-ABEN0000 and ASD-CAEN1000 motor-end encoder connectors. For example, it shows ASD-ABEN0000 for the 400 W ECMA-C△0604□S combination. It lists incremental and absolute encoder cable assemblies separately. Match the encoder and frame codes on the ECMA motor nameplate to the selection table.

The ASDA-B2 manual shows drawings for ASDBCAEN0000 and ASDBCAEN1000. Two 1 kW motors for the same ASD-B2-1021-B drive illustrate the difference. ECMA-C△0910□S → ASDBCAEN0000, while ECMA-C△1010□S → ASDBCAEN1000. Use the complete motor code when ordering. △ and □ are variant placeholders in the manual.

ASDA-A3 and ASDA-B3 connector options

The ASDA-A3 and ASDA-B3 documents identify ACS3-CNENC200 as the drive-end CN2 plug. For compatible F40–F80 motors, they list ACS3-CAEN0000 for the standard motor end and ACS3-CNEN2A00 for the CHOGORI IP67 option. The A3 catalogue also lists ACS3-CAENA000 clip-on and ACS3-CAENM000 threaded options for F100–F180 frames. Check the frame, motor socket and cable outlet direction in the drawing, especially for ECM-A3L, ECM-A3H and ECMC motors.

Feedback signals and pin assignments

Legacy ASDA-B documentation shows differential A/B/Z signals for 2500 PPR incremental encoders. The A3 manual shows T+ and T− serial feedback for the documented Delta motor connections. Check the signal format, pin assignments, supply and shield connection against the exact series manual. For battery-backed absolute encoder systems, see Delta absolute encoder peripheral units. See encoder signal converters when another device requires a different signal format.

Drawings, matching tables and PDF files

ASDA-A2 catalogue (EN) · PDF page 58 lists connector and cable part numbers. Pages 62–70 show motor and accessory combinations.

ASDA-B2 user manual (EN) · PDF page 337 shows connector drawings. Page 344 shows different connector pairings for motors with the same power rating.

ASDA-A3 catalogue (EN) · PDF page 94 shows drive-end and motor-end encoder connectors. See Delta servo manuals for other series documents.

Editor's Note

When sourcing a replacement, photograph both nameplates, the connector mating face and the locking mechanism.

Read the pin numbers from the view specified in the drawing. The wire side and mating face can appear reversed.

Before removing the connector, disconnect power and wait for the DC bus discharge time specified in the drive manual.

If the drive reports an encoder alarm, check both connector locks, bent or pushed-back pins, and cable strain relief.

With power isolated, verify cable continuity and shielding against the model drawing. Follow the manufacturer’s battery procedure before disconnecting a battery-backed absolute encoder.

Related topics

Encoder output signal types · Delta servo I/O connections · Delta servo motors · Delta servo drives · Delta servo modules and accessories

External references

Delta ASDA-A2 catalogue, connector table · Delta ASDA-B2 manual, motor and connector combinations · Delta ASDA-A3 manual, sections 3.1.5 and 3.5