It is available in our turnkey panel manufacturing department for our customers in case of need. Panels, which consist of many variables such as the desired engine power, working scenario of the panel system and material quality, are manufactured by mutual agreement by our project authorities before the order is clarified. You can get your needs related to this subject from the standard models we make or by contacting the staff in the project department.
As can be seen in the models below, the ready-to-run driver control systems that we offer in 4 different formats are in structures that can change such as Input voltage, Output current, Kw and the number of drivers in the panel.
Motor drives ; They are products obtained by placing a speed controller compactly on the standard ac motor, and are suitable for dispersed facilities such as conveyors and fans. These devices are also available in "remote control" systems, depending on the order. They are very useful in places such as restaurants, local health facilities, etc., which should be more tidy.
Derell speed control panels; This type of boards are generally manufactured for open type derell drives and are available in customizable structures. In addition, front surface printing can be made on these panels according to the customer or the machine + control buttons can be customized.
Factory board drives; They are very stylish and useful panel models, which are not produced as a driver from the factory, but with switches, terminals, connectors, etc., as ready-to-plug / use.
Free boards; They are models that can be selected as standard PVC panel, sheet metal or stainless, and are completely customer-oriented, produced in our own workshop and scattered over a wide range. At this point, the main reference point is "order in quantity".
Our valued customers reading please;
Panel drives are generally not sold as standard inverters. Since we are faced with dozens of demands and almost hundreds of combinations, the main thing is to get an idea from the following products. We know that your application or machine is a little different from others. Therefore, it would be best to contact via e-mail or telephone for paneled driver systems.