Analog Signal Controllers
Below are our products where you can see and control your analog signals.
They are mainly devices that you can use to process the value such as 0-1mv, 0-10vDC, 0-20mA and 4-20mA.
It is also used to see data such as current/frequency for speed control devices.
You can get an idea by examining the test and user guides about the products, as well as the educational videos.
In addition to many supply voltage types, we have models that you can read and calibrate analog data in different sizes, set relay outputs and formatted analog outputs.
In all your machine applications;
The speed, current or other torque values of your machine are obtained from the analog outputs of the ac drives.
can be read in different formats. You may not be able to carry the operator panel of every inverter.
Dear members, the following products are available in different sizes and different features.
We have tried to write a detailed description of each of these devices. When choosing devices, please pay attention to the supply voltages and sizes. Unfortunately, such carelessness causes cargo load, waste of time and telephone traffic in vain.
Note: Like all our products on our website, our time relays are products for use in machines for the industrial automation sector. It has been produced with galvanic isolation for potential sources of interference, such as frequency drivers, power supplies, induction motors of various sizes, located in the same room.
Showing 1 to 15 of 15 (1 Pages)