DEIP-44-R-A Digital / electronic indicator
Supply voltage: 24Volt ac/DC
Output type : 1 relay
Reading type; 0-10 volts, 4-20mA (0-20)
Display: 4 digits (+4000,-4000), Panel size 48mm 48mm
+ It is a general purpose electronic display device that you can calibrate some analog data screen. These signals are briefly as follows.
- Compatible with universal 4-20mA or 0-10V sensors
- Sensor value display scale can be adjusted
- Relay output available for control according to SET value
- Voltage output available for sensor supply (12VDC unregulated 20mA max.)
- Dotted display level can be adjusted
- LED Display (12mm 4 digits) with special icons
- IP65 protected front panel against dust and water
- Fixed terminal assembly
- Fixing with claw clamping on the panel cutout
+ (0-10V) > Generally, this input is used to connect to the analog output of speed controllers. But it measures all 0-10 volts DC voltages. It can be directly connected to the potentiometer of inverters.
+ (0-1V) > It can be used as load-cell and humidity indicator. You can read about very low voltages here.
+ (4-20mA) > Analog outputs of inverters and signals from other sensors
It is possible to read from + (4-20mA) current inputs.
In all your machine applications, the speed, current or other torque values of your machine can be read in different formats from the analog outputs of ac drives. You may not be able to carry the operator panel of every inverter.
Standard display caliber on all models, as well as
Optionally;
3,4,6 digit or LCD screen options
Possibility of point display,
Memorization of the lowest and highest values
Although there are model differences;
* 0-10 volt calibrated analog output
* RS485 Modbus communication possibility
* Relay output (programmable).
* Internal power supply (for sensor supply)
* Dual mode (dual analog input)
* Direct pc connection
* Data reporting with USB memory
* Customizable display on models with LCD screen (for bar, rpm etc.)
++ DEIP analog controller is made for industrial machine environments. In the same panel, power supplies, frequency inverters, servo drives, etc. It has galvanized insulation that can work side by side with potential interference emitting products.
- DEIP-37-R-B with 24vac/dc supply
- One size smaller not (maybe 37*72)
- One size BIG size one DEIP-77-R-A (72*72)
- For models with 2 relay outputs and 2 line displays, you can examine the DGI series.
- These devices are used to read the current speed, not to adjust the speed in speed controllers.
- Click for the speed regulating device (electronic potentiometer).
[user manual (pdf)]
Editor's note: Dear friends, this is the most sold digital display model in the market. We used it in many areas such as speedometer (for drivers), pressure gauge, angle indicator, height and distance indicator, ammeter etc. Its operation is very stable and one of its most important advantages is that it is "RELAY OUTPUT". Thus, when the value you read comes to any setting level (lower or higher), you can get a relay output. It can be used practically for operators because it can be read from a distance. I would definitely recommend it if you need something like this.
Attention please !! All assembly operations of DERELL DEIP series electronic indicators must be performed by qualified technical personnel ONLY. Installation must always be carried out in accordance with the relevant ministry laws or regulations in force (2006/42/EC). Otomasyon AVM does not accept any responsibility for installations and individuals that violate local laws and / or other regulations (for overseas sales). If the instructions given by DERELL Elektronik are not followed, the device may experience problems that are not covered by the warranty. Detailed information on this subject is given in detail in the user manual. For detailed information, you can contact support@otomasyonavm.com..
Supply voltage: 24Volt ac/DC
Output type : 1 relay
Reading type; 0-10 volts, 4-20mA (0-20)
Display: 4 digits (+4000,-4000), Panel size 48mm 48mm
+ It is a general purpose electronic display device that you can calibrate some analog data screen. These signals are briefly as follows.
- Compatible with universal 4-20mA or 0-10V sensors
- Sensor value display scale can be adjusted
- Relay output available for control according to SET value
- Voltage output available for sensor supply (12VDC unregulated 20mA max.)
- Dotted display level can be adjusted
- LED Display (12mm 4 digits) with special icons
- IP65 protected front panel against dust and water
- Fixed terminal assembly
- Fixing with claw clamping on the panel cutout
+ (0-10V) > Generally, this input is used to connect to the analog output of speed controllers. But it measures all 0-10 volts DC voltages. It can be directly connected to the potentiometer of inverters.
+ (0-1V) > It can be used as load-cell and humidity indicator. You can read about very low voltages here.
+ (4-20mA) > Analog outputs of inverters and signals from other sensors
It is possible to read from + (4-20mA) current inputs.
In all your machine applications, the speed, current or other torque values of your machine can be read in different formats from the analog outputs of ac drives. You may not be able to carry the operator panel of every inverter.
Standard display caliber on all models, as well as
Optionally;
3,4,6 digit or LCD screen options
Possibility of point display,
Memorization of the lowest and highest values
Although there are model differences;
* 0-10 volt calibrated analog output
* RS485 Modbus communication possibility
* Relay output (programmable).
* Internal power supply (for sensor supply)
* Dual mode (dual analog input)
* Direct pc connection
* Data reporting with USB memory
* Customizable display on models with LCD screen (for bar, rpm etc.)
++ DEIP analog controller is made for industrial machine environments. In the same panel, power supplies, frequency inverters, servo drives, etc. It has galvanized insulation that can work side by side with potential interference emitting products.
- DEIP-37-R-B with 24vac/dc supply
- One size smaller not (maybe 37*72)
- One size BIG size one DEIP-77-R-A (72*72)
- For models with 2 relay outputs and 2 line displays, you can examine the DGI series.
- These devices are used to read the current speed, not to adjust the speed in speed controllers.
- Click for the speed regulating device (electronic potentiometer).
[user manual (pdf)]
Editor's note: Dear friends, this is the most sold digital display model in the market. We used it in many areas such as speedometer (for drivers), pressure gauge, angle indicator, height and distance indicator, ammeter etc. Its operation is very stable and one of its most important advantages is that it is "RELAY OUTPUT". Thus, when the value you read comes to any setting level (lower or higher), you can get a relay output. It can be used practically for operators because it can be read from a distance. I would definitely recommend it if you need something like this.
Attention please !! All assembly operations of DERELL DEIP series electronic indicators must be performed by qualified technical personnel ONLY. Installation must always be carried out in accordance with the relevant ministry laws or regulations in force (2006/42/EC). Otomasyon AVM does not accept any responsibility for installations and individuals that violate local laws and / or other regulations (for overseas sales). If the instructions given by DERELL Elektronik are not followed, the device may experience problems that are not covered by the warranty. Detailed information on this subject is given in detail in the user manual. For detailed information, you can contact support@otomasyonavm.com..
DEIP-44-R-B 0-10v,4-20mA display with relay
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands DERELL
- Product Code: DEIP-44-R-A
- Availability: 9
-
270.00USD
- Ex Tax: 270.00USD
Related Products
DGI-44-R-A - Digital Indicator -220v
The advanced series digital indicator is the DERELL DGI-44-R-A, powered by a 220V AC supply. The pro..
333.00USD Ex Tax: 333.00USD