DEIP-37-R-A Digital Indicator - Electronic Display

Supply voltage: 220V AC
Output type: 1 relay
Input type: 0-10V, 4-20mA (0-20mA)
Display: 4-digit (+4000, -4000)

Simulation: The value shown below simulates the indicator display based on the 0–10V or 4–20mA input signal. Relay output is triggered according to set thresholds.

Input Signal (0–10V)

This is a general-purpose digital indicator where you can calibrate analog values via the display. Key features include:
– Compatible with universal 4-20mA and 0-10V sensors
– Adjustable sensor scaling
– Relay output for control based on set value
– Sensor supply voltage output (12VDC unregulated, 20mA max)
– Adjustable decimal point position
– LED display with special icons (12mm, 4-digit)
– Front panel protection: IP65 against dust and water
– Fixed terminal block
– Snap-fit panel mounting

+ (0–10V) >> Typically used with speed drive analog outputs, but can measure all 0–10V DC signals. Can directly connect to inverter potentiometers.

+ (0–1V) >> Can be used for load cell or humidity readings. Suitable for very low voltage measurements.

+ (0–20mA) >> For reading analog outputs from inverters and other sensors.

+ (4–20mA) >> Fully supported for current-based sensors.

In all industrial machine applications, values like speed, current, or torque can be monitored via analog outputs of AC drives. Operator panels may not always be accessible, but this display provides a compact and practical solution.

Optional Features:
– 3, 4, or 6-digit or LCD display options
– Adjustable decimal point
– Min/Max value memory
– Model-dependent features include:
* Calibrated analog output (0–10V)
* RS485 Modbus communication
* Programmable relay output
* Built-in sensor power supply
* Dual analog input support
* Direct PC connectivity
* USB data logging
* Customizable LCD display (e.g., bar, RPM)

++ The DEIP series is designed for use in industrial panels with potential EMI sources like inverters, servo drives, and power supplies. Galvanic isolation ensures reliable operation even in noisy environments.

– DEIP-37-R-B for 24VAC/DC supply
– DEIP-44-R-A (48×48 mm) smaller size
– DEIP-77-R-A (72×72 mm) larger size
– DGI series for dual relay & dual-line display

– These devices are used for reading values, not for adjusting speeds.
– For speed control, see: Electronic Potentiometer
[User Manual (PDF)]

Editor's Note: This is one of the best-selling digital indicators on the market. We have used it in many applications such as speed display (for drives), pressure, angle, length, distance, ammeter, etc. It is extremely stable, and the presence of a RELAY OUTPUT makes it unique — allowing automation based on thresholds. It's ideal for operators and control panels. Highly recommended.

Attention please! All assembly operations of DERELL DEIP series electronic indicators must be performed only by qualified technical personnel. Installation must comply with official regulations such as (2006/42/EC). Otomasyon AVM is not responsible for illegal or improper installations. Failure to follow DERELL Elektronik instructions may void warranty. Contact: support@otomasyonavm.com

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

DEIP-37-R-A 0-10v,4-20mA display with relay

Mağaza: Efes Otomasyon
Store: Efes Automation
Brands DERELL
Product Code: DEIP-37-R-A
Availability: 89

50.00USD
Ex Tax: 50.00USD

Qty

0 reviews / Write a review