Delta ECMC

Delta ECMC CNC Servo Motors

Delta ECMC is an AC servo motor family for CNC feed axes and precision position control. The W-code models on this page belong to the 220 V class. Their absolute encoder provides 22-bit single-turn position resolution and 16-bit multi-turn data. Check the full drive code and encoder cable together when verifying feedback compatibility.

ECMC-CW, ECMC-EW and ECMC-FW model groups

ECMC-CW · 3,000 rpm: ECMC-CW0401□S (100 W, 40 mm), ECMC-CW0602□S (200 W, 60 mm), ECMC-CW0604□S (400 W, 60 mm), ECMC-CW0807□S (750 W, 80 mm) and ECMC-CW1010□S (1 kW, 100 mm).

ECMC-EW · 2,000 rpm: ECMC-EW1310□S (1 kW, 130 mm), ECMC-EW1315□S (1.5 kW, 130 mm), ECMC-EW1320□S (2 kW, 130 mm), ECMC-EW1820□S (2 kW, 180 mm) and ECMC-EW1830□S (3 kW, 180 mm).

ECMC-FW · 1,500 rpm: ECMC-FW1308□S (850 W, 130 mm), ECMC-FW1313□S (1.3 kW, 130 mm), ECMC-FW1318□S (1.8 kW, 130 mm) and ECMC-FW1830□S (3 kW, 180 mm).

The speeds above are rated speeds. □ marks the character for the brake and shaft/seal option. For example, ECMC-FW1308RS has a keyed shaft and oil seal without a brake. ECMC-FW1308SS has a keyed shaft, oil seal and brake. Once you know the speed and torque requirements, check flange and shaft dimensions, rotor inertia and the brake option during motor selection.

Which Delta drive matches an ECMC motor?

Use Delta’s model table when matching a motor and drive. The 2022 ASDA-A3 catalogue lists the base drive code ASD-A3-1021 for the 850 W ECMC-FW1308□S and ASD-A3-2023 for the 1.3 kW ECMC-FW1313□S and 1.8 kW ECMC-FW1318□S. Check the full servo drive code, interface and power and encoder cables before ordering.

The ASDA-A2 manual lists ECMC combinations under A2-XN. For example, ECMC-CW0604□S appears on the ASD-A2-0421-□N row. The ASDA-MS catalogue lists the 100, 200 and 400 W CW motors under ASD-MS-0421-F-□ and the 750 W CW model under ASD-MS-0721-□. Check the axis combination and total load in an ASDA-MS installation.

Editor’s Note

Photograph both nameplates first. When buying used, ask for full motor and drive codes, a photo of the encoder connector and the cable labels. Before removing a working axis, back up the drive settings, axis direction, scaling and machine zero offset.

Measure the flange when the kW ratings match. The CW1010 and EW1310 are both 1 kW. The CW1010 has a 100 mm frame and a rated speed of 3,000 rpm. The EW1310 has a 130 mm frame and a rated speed of 2,000 rpm. Measure the shaft diameter, keyway, pilot diameter and engagement depth separately. If the axis uses a planetary gearbox, check the motor adapter as well.

Confirm the brake option on vertical axes. Secure the load mechanically before checking brake release and holding. After replacement, verify direction, travel limits and the reference position in a guarded low-speed test. Use the machine’s own referencing procedure to re-establish absolute position.

If the motor hums, inspect the mechanics first. Coupling alignment, screw binding, brake drag and load inertia affect axis acceleration and settling. Complete those checks before running auto-tune. If the drive alarms during a fast stop, investigate regenerative energy, DC bus conditions and the braking resistor specified for the drive.

Record when an intermittent encoder alarm occurs. If the fault appears at a certain position of the cable carrier, check the cable and connector first. If it coincides with a rise in motor current, inspect power and feedback cable routing, electromagnetic interference and grounding.

Include the shaft and seal in a used-motor test. During motor inspection, check shaft play, bearing noise, oil around the seal and connector damage. Ask for a smooth low-speed run and stop with a compatible drive. Record the load, test duration and mounting surface when evaluating motor heating.

ECMC PDF files

2022 ASDA-A3 catalogue — ECMC combination table · English, 52 pages. A3 drive combinations for CW1010, EW and FW motors.

ASDA-A2 user manual — A2-XN and ECMC · English, 2024, 781 pages. Opens directly at the motor table in section 1.5.2.

2021 ASDA-MS catalogue — ECMC-CW motor table · English, 36 pages. CW motor entries from 100 to 750 W.

Related Delta equipment

For other motor families, see Delta ECMA, ECM-A3H, ECM-A3L and ECMR. For linear axes and spindles, see ECML linear motors and ECMS spindle motors.

Delta Servo Motors · Delta Servo Drives · Used Delta equipment · Delta Servo Manuals archive

External sources · Delta ASDA-A3 catalogue · Delta ASDA-A2 manual · Delta ASDA-MS catalogue