Delta AH external terminals
Delta AH External Terminals and Relay Interfaces
Delta AH external terminals connect compatible AH modules' multipole connectors to field-wiring terminals inside the cabinet. They organize high-density I/O wiring in Delta AH PLC series and AH500 systems. This group includes input terminals, transistor-output connection terminals, relay interfaces and motion-module terminals, each serving a different function.
OR models contain relay interfaces. The complete group should therefore not be treated as passive wiring distribution boards. Select by checking the exact PLC module, NPN/PNP output arrangement, connectors, cable and terminal together. The parent group is Delta PLC accessories.
Digital input and output terminals
UB-10-ID32B / DVPAETB-ID32B: Provides 32-input field wiring for AH32AM10N-5B. This DB37-connected terminal preserves the input module's function; select signals and S/S common wiring according to the module diagram.
UB-10-OR16B / DVPAETB-OR16B: A 16-relay output interface specified for PNP-output modules such as AH32AN02P-5C and AH64AN02P-5C. The documented arrangement uses two OR16B units to interface all outputs of a 32-point module.
UB-10-OR32A / DVPAETB-OR32A: A 32-relay output interface option for AH32AN02T-5B, whose source-module output type is NPN/Sink.
UB-10-OR32B / DVPAETB-OR32B: A 32-relay output interface option for AH32AN02P-5B, whose source-module output type is PNP/Source. OR32A and OR32B share a channel count but have different control-side pairings.
UB-10-OT32B / DVPAETB-OT32B: Carries the 32 transistor outputs of AH32AN02T-5B and AH32AN02P-5B to field terminals. It provides a different connection option from the OR relay interfaces. Evaluate load-current and switching limits against the PLC output module.
Counter and motion-module terminals
UB-10-IO16C / DVPAETB-IO16C: Used for the relevant field connections of AH04HC-5A and AH20MC-5A.
UB-10-IO24C / DVPAETB-IO24C: The external terminal specified for AH10PM-5A.
UB-10-IO34C / DVPAETB-IO34C: The external terminal specified for AH15PM-5A. Do not interpret the numbers in IO16C, IO24C and IO34C as standalone standard digital input or output counts. Read pin functions from the connected module's diagram.
Manufacturer documents show corresponding UB-10-… and DVPAETB-… names together for these terminals, so they are grouped under the same headings here. When buying used equipment, compare the product label, board code and connector together.
Cable and connector selection
Choose Delta AH I/O cables by the complete module–cable–terminal pairing. The manufacturer's guide specifies UC-ET010-33B, 1 m for the DB37-connected AH32AM10N-5B, AH32AN02T-5B and AH32AN02P-5B arrangements. Select the terminal separately for input, relay-interface or transistor-output duties.
Within Delta DVP / AH I/O cables, UC-ET010-24C and UC-ET010-24D / UC-ET020-24D / UC-ET030-24D provide the documented split connections from compatible MIL-connected modules to OR16B relay boards. UC-ET010-13B is specified for IO16C; UC-ET010-15B is specified for AH10PM-5A/IO24C and AH15PM-5A/IO34C. Verify both connectors and pin assignments as well as cable length.
Power, addressing and software
An external terminal does not independently increase the PLC's I/O address count. It provides field connections and, depending on the model, a relay interface for an existing module. No PLC program is downloaded to the terminal board. Programming and hardware settings belong to the connected CPU or function module.
On relay interfaces, distinguish 24 V/GND supply terminals from load commons such as C0 and C1 using the diagram. Check supply requirements, contact loads, total current per common and suppression against the exact terminal's documentation. Replacing an AH module does not automatically preserve compatibility with the field terminal board.
Editor's Note
Start with the PLC module's complete suffix. A description such as “32-point terminal” is insufficient. Distinguish -5B from -5C, NPN from PNP, and relay interfaces from direct output terminals. Keep photographs of the board, cable and module labels together.
If an output fails, trace the command and module LED through the cable, terminal-board supply, relay contact and load common before condemning the PLC module. A relay click does not prove healthy contacts under load.
Disconnect the cable at both ends before checking continuity with power removed. Intermittent wiring, bent pins and loose terminals can explain faults that appear only when a connector moves. Do not use a meter's continuity mode on an energized circuit.
For several failed channels, check shared supplies and COM wiring first. During repair, inspect cracked joints, corrosion and overheated terminals. Match relay coil voltage, contact configuration and pin arrangement before replacement.
Do not add arbitrary jumpers to motion-module terminals. Identify pulse, direction, limit and encoder connections from the applicable diagram; incorrect wiring can affect commands or feedback. Bench-test separately from the machine and verify every channel after replacement.
Site resources and PDF files
Use Delta PLC accessories files for installation, cable-selection and hardware documents. Wider document selection is available under Delta PLC and HMI manuals. Match documents to both the terminal label and the connected AH module's complete code.
Related topics
See Delta AH digital modules for input/output cards, Delta AH power supplies for system power and Delta external terminals for other terminal options. Similar connectors on different platforms do not establish matching pin assignments or electrical compatibility.
Navigation
Delta PLC category · Second-hand Delta products
External references
Delta AH series catalogue — English; archived manufacturer document
Delta PLC/HMI Cable Selection Guide — English; AH module, cable and terminal pairings