Delta AH04HC-5A
Delta AH04HC-5A 4-Channel High-Speed Counter Module
The Delta AH04HC-5A is a four-channel high-speed counter module for the Delta AH500 PLC rack. Its 5–24 V DC differential count inputs accept incremental encoder pulses at a maximum input frequency of 200 kHz. Applications include cut-to-length measurement, winding turn counts and conveyor position tracking.
The AH02HC-5A is the two-channel option with a removable terminal block. The AH04HC-5A has four channels, a 36-pin HDC field connector and 2.4 W internal power consumption. Check rack, CPU and slot compatibility against the AH expansion modules and AH power supplies pages.
Counting modes and field wiring
Count formats include pulse/direction, up/down pulses and A/B quadrature at ×1 or ×4. The module supports linear and circular counting. Each channel has a separate reset input and a 24 V DC open-collector comparison output. On CH0, phase A uses X0.8±, phase B uses X0.9±, reset uses X0.0± and comparison output is Y0.8.
Delta lists the 1 m UC-ET010-13B cable and the UB-10-IO16C external terminal. For legacy part numbers, see DVPACAB7D10, AH I/O cables and AH external terminals.
ISPSoft setup and addressing
Add the module in HWCONFIG in ISPSoft. The AH500 manual assigns 28 input and four output data registers. Read the start address in the project and verify count and comparison settings for each channel. See Delta PLC software for software and AH Motion backplanes for rack selection.
Manual and PDF files
AH500 Hardware and Operation Manual (PDF, English) · Specifications on PDF pages 120–121, connector and wiring on pages 270–273, and addressing on page 304. Browse all documents under Delta AH PLC PDF files.
Editor’s Note
When buying used, check the AH04HC-5A nameplate and the CN1 connector.
Ask whether the cable and terminal are included. You may need both to install the module.
On the bench, use a known encoder to test each of the four channels in turn.
Check A/B direction, reset and the comparison signal during the same test.
If the count drifts only at speed, start with the encoder signal type, shielding and cable routing.
Related topics
AH temperature and motion modules · AH motion controllers · AH digital modules · AH05PM-5A · AH10PM-5A · AH15PM-5A
More from Delta · Delta PLC · Delta PLC accessories · Second-hand Delta products · Delta PLC and HMI manuals
External reference · Delta AH500 manual, 12 April 2023 edition