Delta AH02HC-5A
Delta AH02HC-5A high-speed counter module
The Delta AH02HC-5A is a two-channel, 200 kHz maximum high-speed counter module for the Delta AH500 PLC. It uses incremental encoder pulses for position and direction tracking, cut-to-length measurement and high-speed part counting.
Counting modes and connections
Each channel uses 5–24 V DC differential inputs. The pulse formats are P/D (pulse/direction), U/D (up/down pulses), AB (A/B ×1) and 4AB (A/B ×4). General and circular counting are supported. For a high-speed counter application, check the output type and frequency of the line-driver encoder.
CH0 uses X0.8± and X0.9± for A/B, X0.0± for reset, and Y0.8 / C0 for comparison output. CH1 uses X0.10± and X0.11±, X0.1±, and Y0.9 / C1, respectively. Reset inputs accept 5–24 V DC. The open-collector comparison outputs are rated 24 V DC, 15 mA maximum.
ISPSoft setup
In ISPSoft, use HWCONFIG to check the module slot, pulse input mode, filter and comparison values. Match the CPU, firmware and rack when replacing hardware. Select the PLC cable for the programming port on the installed CPU.
PDF files
AH02HC-5A mounting and wiring sheet (includes English and Turkish, 2 pages) · AH500 Hardware & Operation Manual (English, 678 pages). Specifications start on page 2-84, wiring on 4-99 and troubleshooting on 12-51.
Editor’s Note
On a used module, check the full model label, the backplane connector and both removable terminal blocks.
Bench-test CH0 and CH1 separately in both directions at low speed with a known encoder.
If the count is four times what you expect, start by checking the AB or 4AB setting.
If counts drop as speed rises, check the cable shield, A/B pairs and input filter.
Test reset and comparison separately. Use a test load within the output’s 15 mA limit.
Related topics
The four-channel AH04HC-5A has a different terminal arrangement. For axis control, see the AH05PM-5A, AH10PM-5A, AH15PM-5A and AH20MC-5A.
Encoders · What is a rotary encoder? · Panel counters · AH I/O cables · AH external terminals
AH temperature and motion modules · AH expansion modules · Delta AH PLC series · Delta PLC · Second-hand Delta models
External references · Delta instruction sheet, 5012616603 · Delta AH500 manual, AH-0109420-08