Delta UB-10-OT32B / DVPAETB-OT32B
Delta UB-10-OT32B / DVPAETB-OT32B — DB37 External Terminal for 32 Outputs
Delta UB-10-OT32B / DVPAETB-OT32B is a DB37 external terminal assembly that routes 32 transistor outputs from suitable AH digital modules to field terminals. It belongs to the Delta AH external terminals range and provides an organised, detachable connection between AH digital modules and field wiring.
Compatible PLC modules and cable
| PLC output module | Output type | Connection |
|---|---|---|
| AH32AN02T-5B | 32 NPN / sink | UC-ET010-33B → OT32B |
| AH32AN02P-5B | 32 PNP / source | UC-ET010-33B → OT32B |
The connected PLC output module determines NPN or PNP operation. OT32B is listed for both models; connect the load according to the relevant NPN/PNP diagram. Check the complete module code within the Delta AH PLC series.
The manufacturer accessory table specifies the 1 m UC-ET010-33B cable. Relevant hardware documents also show DVPACAB7C10 alongside this DB37 cable. Compare other options under Delta AH I/O cables.
Technical and mechanical information
| Item | UB-10-OT32B / DVPAETB-OT32B |
|---|---|
| Application | External terminal connection for 32 transistor outputs |
| Connection towards the module | DB37 |
| Mounting | DIN-rail base |
| Width × depth × height | 113 × 87 × 50.8 mm |
The reviewed hardware manual gives 12–24 V DC, 0.1 A output specifications for AH32AN02T-5B and AH32AN02P-5B. Select loads within the PLC module’s channel, group and supply limits. Adding an external terminal does not increase the module’s output-current capability.
Output markings and UP / ZP terminals
| Marking in the manual | Function |
|---|---|
| Y0.0–Y0.15 | 16 output connections |
| Y1.0–Y1.15 | 16 output connections |
| UP / ZP | Supply and reference terminals; wire according to the module diagram |
The AH wiring drawing places even-indexed outputs on the upper row and odd-indexed outputs on the lower row, with UP and ZP at the right. The table uses the manual’s address notation. Check the actual PLC project’s starting address and the markings printed on the terminal assembly separately.
OT32A, relay-terminal and input-terminal distinctions
UB-10-OT32A / DVPAETB-OT32A serves MIL connector applications, using cables such as UC-ET010-24A and UC-ET010-24B. Its connector arrangement differs from the DB37 interface of OT32B.
For a relay interface, the catalogue pairs NPN AH32AN02T-5B with UB-10-OR32A and PNP AH32AN02P-5B with UB-10-OR32B. UB-10-ID32B is a terminal for input modules. Compare the functions of the OT, OR and ID codes together.
Editor’s Note
Read the final letter carefully: OT32A and OT32B have different connectors. After identifying the DB37 socket, check the complete PLC module code as well. Correct selection avoids transferring thirty-two field wires unnecessarily.
Do not infer NPN or PNP operation from the terminal name alone. The same OT32B is listed with two different AH output-module types. Arrange supply and load wiring for the module actually installed.
On a used assembly, inspect DB37 contacts, retaining screws, terminals and the rail clip. A darkened terminal or loose contact can overheat under load. Cracked plastic can also affect mechanical reliability.
Before continuity checks, switch off power and disconnect the DB37 cable and field wiring. Check the relevant contact-to-terminal path and adjacent terminals for shorts against the diagram. Avoid measuring through a connected PLC output.
For a failed output, compare the PLC command, module LED and voltage at the external terminal, then check the cable and load. Voltage measured without a load does not prove correct operation under load.
Test with a suitable low-current load while preventing machine movement. Keep relay-contact ratings for OR terminals separate from OT32B. After repair or cleaning, check the required channels individually under load.
PDF and related topics
Use the Delta PLC accessories PDF and software files page for wiring diagrams. Further documentation is available under Delta PLC and HMI manuals and Delta user manuals. Review the system family under Delta AH500.
Navigation: UB-10-OT32B / DVPAETB-OT32B main page · Delta PLC accessories · Delta PLC models · Used Delta products
External references
Delta AH Series Catalogue — Accessory Selection, 31–32 · Delta AH500 Hardware Manual — 3-30 / 5-25 / 5-29 · Delta PLC/HMI Cable Selection Guide — 2-20 / 2-36