Delta AHBP07M2-5A

Delta AHBP07M2-5A 7-Slot AH Motion Main Backplane

Delta AHBP07M2-5A is an AH Motion main backplane with seven slots for additional modules, bringing the controller, power supply and modules together on one rack. It belongs to Delta AH Motion backplanes and Delta PLC accessories. A suitable controller installed on the backplane executes the motion program.

Controller compatibility and slot count

The M2 backplane's controller slot is reserved for the AHxxEMC-5A family. AH08EMC-5A, AH10EMC-5A and AH20EMC-5A are controllers in this family. Standard AHCPU and RTU modules are not supported in this controller slot. Do not assume that every CPU listed under Delta AH PLC series is compatible because it shares the brand or housing family.

The seven slots are additional-module positions, excluding the power supply and controller positions. They do not specify the number of motion axes. Axis capacity depends on the selected controller; module use depends on the hardware configuration. For projects requiring fewer slots, compare AHBP03M2-5A with three slots and AHBP05M2-5A with five slots.

Power supply and module selection

Select a suitable Delta AH power supply for AHBP07M2-5A. AHPS05-5A accepts 100–240 V AC, while AHPS15-5A accepts 24 V DC. The catalogue's 1.41 W internal consumption for the backplane is not the total power requirement of the controller and installed modules. Calculate the power budget from the actual module list.

Assess AH modules separately in the hardware plan, including AH32AM10N-5A digital input, AH32AN02T-5A digital output, AH04AD-5A analogue input and AH04DA-5A analogue output. For communication modules such as AH10SCM-5A, also verify the models and hardware revisions supported by the controller.

Port, installation and expansion limit

The backplane includes an RS-485 communication port. EtherCAT motion-network connections are made through the appropriate AHxxEMC controller. Do not use the serial terminal as an EtherCAT port or a rack-extension connection.

The manufacturer's drawing specifies 399 mm overall width, 110 mm height and a 374 mm mounting dimension for AHBP07M2-5A. Installation uses M5 screws or suitable clips on a 35 mm DIN rail. Allow separately for module depth, cable exits and maintenance access.

The compact AH Motion system does not support an extension backplane. If seven slots are insufficient, reassess the controller and system architecture before planning an additional standard AH expansion rack.

Software and field connections

No independent motion program is loaded into the backplane. Preserve the controller project, module order and addressing together. Compare Delta PMSoft documentation with the controller's firmware information when selecting the engineering tool and version. For high-density I/O modules, check cable and terminal matching under Delta AH external terminals.

Editor's Note

Read the complete rack label first. The M2 designation in AHBP07M2-5A matters; finding another AH rack of similar length does not establish compatibility with the existing controller.

Photograph and label the module order and wiring before dismantling, and back up the project. Reassembling seven modules in a different order can change addressing and application behaviour even when they fit physically.

Disconnect power and verify the absence of voltage before replacing the backplane. Backplane replacement must not be treated as the same operation as hot swapping a supported I/O module.

Inspect a used unit for bent contacts, corrosion, heat damage, broken latches and damaged mounting holes. Do not force modules into place. Compare a suspect slot with a known-good compatible module to determine whether the fault follows the module or the slot.

Begin testing with a suitable power supply and controller, then connect additional modules progressively under controlled conditions. Monitor diagnostics after each step. Check supply, grounding, module seating and project configuration together before attributing the fault to the backplane.

PDF and hardware documentation

Consult Delta PLC accessories files and Delta PLC and HMI manuals for relevant hardware documents. The AHBP03M2-5A / AHBP05M2-5A / AHBP07M2-5A Instruction Sheet, dated 2022-05-13, covers installation and includes a Turkish section. Use the AH Motion Controller Hardware Manual for controller and module configuration.

Related topics

Delta AH Motion backplanes · Delta AHBP03M2-5A · Delta AHBP05M2-5A · Delta AH20EMC-5A · Delta AH power supplies · Delta AH external terminals

Return to Delta PLC accessories. Browse controllers in the Delta PLC category and available equipment under second-hand Delta products.

External references: Delta AH Series Catalogue · Delta Download Center