Delta AHBP05M2-5A
Delta AHBP05M2-5A — AH Motion Main Backplane with 5 I/O Slots
Delta AHBP05M2-5A is an AH Motion main backplane with 5 I/O slots. Within the Delta AH Motion backplanes range, it provides the base for a motion controller, power supply and I/O modules. Select the correct CPU-slot type and backplane generation within the Delta AH PLC series.
CPU slot and system limits
The manufacturer catalogue specifies AHxxEMC-5A motion controllers for the CPU slot; standard AHCPU and RTU modules are not supported in that position. Check the complete code and manual for the relevant controller, such as AH10EMC-5A. Do not assume that every CPU in the AH500 family fits this backplane.
The five slots are for I/O modules; power-supply and CPU positions are additional. The compact Motion arrangement does not support an extension backplane. Determine the required slot capacity before planning the system around future local expansion racks.
Technical information
| Item | AHBP05M2-5A |
|---|---|
| Product type | AH Motion main backplane |
| I/O slots | 5 |
| Applicable power supplies | AHPS05-5A / AHPS15-5A |
| I/O family | AH500 series input/output modules |
| Serial port on the backplane | RS-485 |
| Body dimensions: width × height | 328 × 110 mm |
| W1 dimension in the drawing | 303 mm |
W1 is a separate dimension in the manufacturer drawing and must not be confused with overall width. Calculate power requirements for the complete rack, including the controller and installed modules.
Power supply and I/O selection
The Delta AH power supplies range includes AHPS05-5A and AHPS15-5A, specified for this model. Check the power supply’s input requirements and the complete rack load. Do not assign a power module’s input-voltage rating to the backplane itself.
Review AH digital modules and AH analog modules when planning I/O. For AH communication modules, also consult the selected Motion controller’s supported-module table. Five available physical slots do not establish support for every special module in every position.
Comparison with other M2 backplanes
AHBP03M2-5A provides 3 slots, this model provides 5 slots, and AHBP07M2-5A provides 7 slots. Recheck panel space, power budget and hardware configuration when changing backplane size. Slot count does not specify the number of controlled axes.
Editor’s Note
Check that the label identifies an M2 backplane before ordering. Do not select a similar-looking AH base using only its length or slot count. Record the full codes of both the existing backplane and its controller.
Inspect connectors carefully on a used backplane. Request close photographs of bent pins, recessed contacts, heat damage, corrosion or cracked plastic. Never force a module that does not seat correctly.
Switch off power, isolate field supplies and photograph the module order before removal. Check grounding and mounting hardware as well. A distorted mounting arrangement can put stress on the connectors.
If several modules disappear together, check the power supply, module seating and controller diagnostics before attributing the fault to the backplane. For a fault that consistently follows one slot, compare using a suitable, known-good module under controlled conditions.
Appearance alone cannot establish that an empty backplane works. With a suitable supply and Motion controller, verify module recognition, input readings and stable communication. Test outputs under safe conditions that cannot cause machine movement.
Avoid improvised bridges or scraping backplane contacts. Cleaning alone may not resolve carbonisation or a loose contact. After repair, verify operation under load and over a sustained running period.
PDF and related topics
Use the Delta PLC accessories PDF and software files page for hardware and installation documents. Further documentation is available under Delta PLC and HMI manuals and Delta user manuals.
Review AH10PM-5A and AH20MC-5A for motion-control components, and AH external terminals for field-wiring accessories. These references do not replace compatibility checks for the selected controller and slot.
Navigation: AHBP05M2-5A main page · Delta PLC accessories · Delta PLC models · Used Delta products
External references
Delta AH Series Catalogue — Compact Motion / Backplanes · Delta AH Motion Hardware Manual — 3.3 AH Motion Backplane