Delta AH20EMC-5A
Delta AH20EMC-5A – 32-Axis EtherCAT Motion Controller CPU
The Delta AH20EMC-5A is a Delta AH Motion CPU that controls up to 32 physical servo axes. Its built-in EtherCAT master port operates at 100 Mbps. Delta specifies a minimum synchronization time of 2 ms for 32 axes. Typical applications include coordinated motion on packaging, printing and assembly machinery.
Servo network and programming connection
Connect the servo network to the CPU’s EtherCAT master port. The separate Ethernet port supports Modbus TCP and EtherNet/IP Adapter communication. A programming PC can connect over Ethernet or mini USB. When reviewing EtherCAT drives such as the Delta ASDA-A2-E, verify the exact drive code, firmware and servo motor pairing together.
Backplane, power and expansion
For operation as the main CPU, use an AH Motion backplane. The AHBP03M2-5A, AHBP05M2-5A and AHBP07M2-5A provide three, five and seven additional I/O slots respectively. For these racks, choose the power supply to suit the cabinet supply. The AHPS05-5A accepts 100–240 V AC and the AHPS15-5A accepts 24 V DC. Delta also documents operation as a motion module on a compatible AH500 main backplane. For this configuration, verify the host CPU, slot and firmware in the project. See AH expansion modules for local I/O.
ISPSoft, COMMGR and axis settings
Use ISPSoft for PLC logic and motion programming, and COMMGR to manage the PC connection. Define the rack and I/O layout in HWCONFIG. In the motion project, match the drive order to the physical EtherCAT chain and each axis number to the correct machine axis. MC_Home and MC_MoveAbsolute are available for homing and absolute positioning. See Delta PLC software for other engineering tools.
Manuals and PDF archive
AH20EMC-5A – AH Motion Controller Operation Manual (EN) · PDF page 21 covers axis and communication specifications. Page 51 covers ISPSoft connections over USB and Ethernet. For hardware, see the AH Motion Hardware Manual (EN, archive edition) and Delta AH PLC PDF files.
Editor's Note
When buying a used CPU, read the complete nameplate. Start with the AH20EMC-5A code to confirm the servo network and axis capacity.
Check that the EtherCAT and Ethernet sockets hold their plugs securely and that the mini-USB socket is firm. Ask whether the backplane and power supply are included.
Before replacement, back up the ISPSoft project, axis parameters and physical drive order.
Once the drives are online, verify that each configured axis number corresponds to the intended motor. This matters when the machine uses several identical drives.
Before the first motion test, compare the homing direction, mechanical limits and software travel limits with the machine project.
Related models and topics
The AH08EMC-5A supports eight EtherCAT axes and the AH10EMC-5A supports 16. The AH20MC-5A uses DMCNET, and the AH10PM-5A uses pulse-train output. See AS500 motion controllers for another Delta platform.
Delta AH PLC series · Delta PLC · Second-hand Delta equipment
External references
Delta AH Motion Controller Hardware Manual (EN) · Delta AH Motion Controller Operation Manual (EN)