Delta DVP training kits

Delta DVP Training Kits – UT-14SS2-A and UT-12SE-A1

Delta DVP training kits provide a practical introduction to PLC programming, HMI design and I/O exercises. This group covers UT-14SS2-A and UT-12SE-A1. Each combines a real PLC, HMI, power supply, connection cables and an I/O simulator board. See Delta DVP PLC series for the controller families and Delta PLC accessories for supporting components.

Select a kit according to the intended learning tasks. UT-14SS2-A introduces PLC/HMI programming and serial communication; UT-12SE-A1 adds Ethernet connection and network-parameter exercises. The kit code identifies the complete package; check the PLC's own ordering code separately.

UT-14SS2-A: Introduction to PLC and HMI programming

The 2024 Starter Kit Manual lists a DVP14SS211R PLC, 7-inch DOP-107BV HMI, DVPPS01 24 V DC power supply and an I/O simulator board. This DVP-SS2 CPU provides 8 digital inputs and 6 relay outputs.

The listed cables include UC-PRG020-12A for PC-to-PLC programming, UC-PRG015-02A for HMI programming and UC-MS020-06A for serial PLC-HMI communication. The package also includes DC power wiring, an RS-485 connection cable and HMI mounting hardware. Establish each cable's function before installation.

UT-12SE-A1: Ethernet training

The same manual lists a DVP12SE11R PLC, Ethernet-capable 7-inch DOP-107EV HMI, DVPPS01 and an I/O simulator board. This DVP-SE CPU provides 8 digital inputs and 4 relay outputs.

The PLC programming cable is UC-PRG015-01A, and the Ethernet cable is UC-PRG030-20A. HMI USB, DC power and RS-485 connection cables are also listed. PC-to-PLC programming and PLC-to-HMI communication are separate connections.

These contents describe the packages in the reviewed manual revision. Older sets may contain different HMI generations. For purchases or used-kit inspections, compare the PLC and HMI labels, cables and simulator board individually. A kit name alone does not guarantee identical HMI hardware across production periods.

Software and project files

The manual's PLC examples use Delta ISPSoft. It also covers Delta COMMGR for PC communication, appropriate DOPSoft software for the HMI, and Delta DCISoft for Ethernet parameter tasks. Match software versions to the actual PLC/HMI hardware and computer operating system.

PLC and HMI projects are separate files. Check the target device before opening or downloading an example, and record drivers, ports, station addresses and network settings. Delta PLC software and Delta HMI files provide related tools and documents.

Practical exercises

Begin with input monitoring, basic on/off logic, latching, timers, counters and sequence control. Then create HMI buttons, status lamps and numeric objects and link them to PLC addresses. UT-12SE-A1 also supports exercises in Ethernet parameters and connection checks.

Relay outputs must not be treated as high-speed pulse outputs. Plan analog measurement or motion-control exercises with suitable additional hardware and wiring. Operating an indicator on the simulator board is a different load application from driving a real motor or valve.

Editor's Note

Check more than the PLC and screen when buying a training kit. Missing simulator boards, programming cables or connection parts can turn the first lesson into a search for accessories. Photograph the complete package and compare it with the component list.

Commission one stage at a time. Verify power and the PLC connection first, then test one input and one output. Add HMI communication afterward so that any fault can be traced to the stage where it appeared.

A USB connector alone does not identify the correct programming cable. The SS2 kit's converter-based PLC connection differs from the SE kit's mini-USB connection. Follow the applicable kit instructions for drivers and communication paths.

An HMI button needs the correct PLC address. Monitor the PLC online and confirm that the intended bit or register changes. Keep a small address list rather than changing addresses at random; it makes exercises easier to reproduce.

For a used kit, test switches, every input, output indicators and different areas of the touchscreen. Check delivery of example programs and separate project backups. Devices powering up does not prove that the package is complete and ready for training.

Keep exposed mains-input terminals on the power supply inaccessible through suitable enclosure and protection. Use low-power test loads for learning exercises. Review output type, load ratings and protection separately before connecting real machine loads.

Sources, PDF and software files

The document hub is Delta PLC accessories PDF and software files. Use the Starter Kit Manual for package contents and installation sequence, together with the individual PLC and HMI manuals. Other documents are available under Delta PLC and HMI manuals.

Related topics

Delta DVP programming cables · Delta DVP communication cables · Delta DVP power supplies · Delta HMI programming and HMC cables · Delta DOP-100

Navigation: UT-14SS2-A · UT-12SE-A1 · Delta PLC accessories · Delta PLC models · Second-hand Delta products

External references

Delta DVP Starter Kit Manual (English) · External archive copy of the manufacturer's 2024-revision manual · Delta DVP/TP manufacturer catalog (English)


Refine Search