Delta UT-12SE-A1

Delta UT-12SE-A1 PLC and HMI Starter Kit

Delta UT-12SE-A1 combines a DVP12SE11R PLC and a DOP-107EV operator panel for learning PLC programming, HMI screen design and Ethernet connectivity. It belongs to Delta DVP training kits and Delta PLC accessories. The kit order code identifies the package; the PLC inside has its own model number.

PLC, operator panel and power supply

The Delta DVP12SE11R controller has 8 digital inputs and 4 relay outputs. Its 12 built-in I/O points do not mean 12 inputs. Features include 16K steps of program memory, mini USB, Ethernet and two RS-485 ports. This DVP-SE CPU uses 24 V DC power; suitable DVP-S extension modules are selected separately.

DOP-107EV is an Ethernet-capable HMI with a 7-inch TFT, 800 × 480-pixel screen. The PLC logic and HMI project are downloaded to their respective devices. See Delta DOP-100 for the panel family and documentation.

The reference kit includes a DVPPS01 / DVP-PS01 power supply rated 24 V DC, 1 A, 24 W. Wire the PLC, HMI and simulator according to the kit diagram. Before adding external loads, calculate total current consumption and check the Delta DVP power supply specifications.

Kit cables and I/O simulator

UC-PRG015-01A is the 1.5 m USB-A-to-mini-USB PLC programming cable. UC-PRG015-02A is the 1.5 m USB-A-to-USB-B HMI programming cable. Their device-side connectors differ, so select each cable for its intended port.

UC-PRG030-20A is a 3 m RJ45-to-RJ45 Ethernet cable. The manufacturer's kit inventory also lists the 3081419700 PLC–HMI RS-485 cable, 3865259300 DC power cable, 5502577101 I/O simulator board and four 3534435700 HMI screw locks. These describe the reference package; confirm the actual inventory of any second-hand set.

USB project transfer, PLC–HMI communication and Ethernet networking serve different purposes. Preserve this distinction when selecting replacements from Delta DVP programming cables and Delta DVP communication cables. The simulator board lets learners observe input and output behaviour on the workbench.

Software and the UT-14SS2-A alternative

Use ISPSoft for PLC projects, COMMGR for PC–PLC communication configuration and DOPSoft for HMI screens. DCISoft supports Ethernet device discovery and network parameter configuration. Consult Delta PLC software and the HMI documentation, matching projects to the installed device models.

The Delta UT-14SS2-A kit contains a DVP14SS211R and DOP-107BV. UT-12SE-A1 is specified with DVP12SE11R and DOP-107EV. When moving between kits, review the selected CPU, I/O addresses, panel model and communication settings.

Editor's Note

When buying a used training kit, inspect more than the box label. Check both device nameplates, the simulator, power supply and all three PC connection cables. A missing lead can interrupt the first setup session.

Check power and wiring first. Then operate one simulator input and compare its PLC indicator with the online monitoring display. A simple input-to-output program helps establish the connection between the training hardware and software.

A clicking relay does not prove that its output contact is healthy. Verify the common connection and contact operation with a suitable test load. Do not connect motors or high-current loads directly to the training board.

If USB access to the PLC works but the HMI cannot read values, inspect the HMI driver selection, port settings and addresses. For RS-485 testing, check the station number, baud rate, data format and wiring one item at a time.

For Ethernet testing, give the PC and PLC distinct IP addresses in the same subnet. Establish communication before expanding the screen project. Save separate PLC and HMI backups before modifying an existing working system.

PDF manuals, software and examples

Use Delta PLC accessories files for starter-kit and accessory documents, and Delta HMI files for panel documentation. Check the device-specific instructions through Delta PLC and HMI manuals. The manufacturer's 2024 manual revision directs users to its download centre for software and examples; do not assume that a USB flash drive is supplied.

Related topics

Delta DVP training kits · Delta UT-14SS2-A · Delta DVP-SE · Delta DVP PLC series

Return to Delta PLC accessories. Browse controllers in the Delta PLC category and available devices under second-hand Delta products.

External references: Delta Starter Kit Manual (archived manufacturer document) · Delta Download Center