Delta AH20MC-5A
Delta AH20MC-5A – 12-Axis DMCNET Motion Control Module
The Delta AH20MC-5A is a rack-mounted motion control module for coordinating servo axes in the Delta AH500 system. It controls 12 physical axes over DMCNET and provides 4 virtual axes for motion programming. Delta specifies a 1 ms command update interval for all 12 axes.
Typical applications include multi-axis handling and coordinated path following. The module supports two-axis linear or circular interpolation and three-axis linear or helical interpolation. For drives from the Delta ASDA-A2 family, look for the DMCNET-capable A2-F variant.
DMCNET and external I/O
The DMCNET link is rated at 10 Mbit/s per channel with a maximum transmission distance of 20 m. Use the 120 Ω termination and wiring diagram specified in the Delta manual. DMCNET and Ethernet have separate ports and separate NET and ETH indicators on the front panel.
For field I/O on CN1, check Delta’s specified UC-ET010-13B I/O cable (DVPACAB7D10) and UB-10-IO16C terminal block (DVPAETB-IO16C). Consult the model tables for other AH I/O cables and AH external terminals. When selecting a spare, check the CPU, backplane and slot type, firmware versions and available AH power supply capacity together.
ISPSoft and PMSoft
Use ISPSoft for the host PLC project and rack configuration, and COMMGR to configure the PC-to-PLC connection. Use PMSoft to retrieve and back up the AH20MC-5A motion program and axis parameters. The module supports PC connections over mini USB and Ethernet. For mini USB, check the virtual COM driver for your PC. See Delta PLC software for tool and version information.
How the AH20MC-5A differs from related models
The AH05PM-5A, AH10PM-5A and AH15PM-5A are pulse-train motion modules with 2, 6 and 4 axes respectively. The AH20MC-5A sends servo commands over DMCNET. The similarly named AH20EMC-5A is an EtherCAT motion CPU in the AH motion controller range. For encoder pulse counting, see the AH02HC-5A and AH04HC-5A high-speed counter modules.
Manual and PDF downloads
Delta AH500 Motion Control Module Manual (PDF, English). See PDF page 12 (printed 1-2) for axis specifications, page 45 for the DVPAETB-IO16C drawing, page 519 (printed 14-2) for DMCNET specifications and page 539 (printed 15-2) for the PMSoft USB connection.
See the Delta AH PLC PDF files archive for other documents in the series.
Editor’s Note
When buying a spare, take a photo of the module nameplate and record the complete model number of each servo drive.
While the system is still working, back up both the PLC project and the motion module project.
Read the ETH and NET indicators separately. An active Ethernet link can appear while the DMCNET link is down.
Compare the DMCNET node IDs, axis order and network termination with the original project.
During bench testing, use a compatible A2-F drive and check communication, axis status and homing under safe test conditions.
Related topics
How a servo drive works with a servo motor · Delta AH digital modules · Used servo drives
More in this range · Delta AH PLC series · AH expansion modules · AH temperature and motion modules · Delta PLC models · Used Delta equipment
External references
Delta AH500 Motion Control Module Manual, distributor archive (PDF)