Delta AH32AN02T-5B

Delta AH32AN02T-5B – 32-Point NPN Digital Output Module

The Delta AH32AN02T-5B is a digital output module that adds 32 NPN sinking transistor outputs to a Delta AH500 PLC rack. Its DB37 connector carries the outputs over one cable to an external terminal board, keeping low-current DC control wiring together inside the cabinet.

Output Ratings and Load Selection

Delta’s wiring diagram shows 12–24 V DC. The resistive load limits are 0.1 A per output and 1 A per COM. The maximum module response time is 0.5 ms in either switching direction. An NPN output sinks load current toward 0 V when it turns on. Check the diagram for the 24 V DC auxiliary supply at UP/ZP and the load connections. See AH rack power supplies when planning cabinet power.

DB37 Cable and Terminal Options

Delta specifies the 1 m UC-ET010-33B cable. Use the UB-10-OT32B to bring the outputs to field terminals, or the UB-10-OR32A for relay contacts. See Delta AH external terminals for other options.

The suffix identifies the connection. The AH32AN02T-5A has a removable terminal block, the AH32AN02T-5B has DB37, and the AH32AN02T-5C has a latching MIL connector. The DB37-equipped AH32AN02P-5B has PNP sourcing outputs.

ISPSoft and Output Addressing

Check the rack, slot and starting Y address in HWCONFIG in ISPSoft. The module occupies 32 bits in the PLC output address space. The manual shows the range as Yn.0–Y(n+1).15.

Editor’s Note

When buying a used card, read the T-5B suffix on the label and inspect the DB37 pins and retaining screws.

Check the code on a used cable as well. Compare its pin mapping with the diagram even if the connector fits.

During a bench test, check each channel with a suitable test load as well as checking its output LED.

If several outputs operate together, calculate the total load current on the relevant COM group.

Record the slot, starting Y address and terminal model before replacing the card. On the first test, verify which output reaches each field terminal.

User Manual and PDF Files

AH32AN02T-5B DB37 wiring diagram – English PDF. AH500 Hardware and Operation Manual, section 4.7.15, printed page 4-46. See Delta AH PLC PDF files for other documents in the series.

Related Topics

32-input AH32AM10N-5B · 64-output AH64AN02T-5C · 16-point NPN AH16AN01T-5A · Relay-output AH16AN01R-5A · Delta AH I/O cables

Delta Automation · Delta PLC · Delta AH PLC series · Delta AH expansion modules

External reference · Delta PLC / HMI Cable Selection Guide, section 2.2.4