Delta AH64AN02T-5C
Delta AH64AN02T-5C 64-Point NPN Transistor Output Module
The Delta AH64AN02T-5C is a digital output module that adds 64 NPN transistor outputs to a Delta AH500 PLC rack. The outputs are used in 12–24 V DC field circuits. Each of the two latching 40-pin MIL connectors carries 32 outputs.
The T suffix identifies NPN sinking outputs. The AH64AN02P-5C has the same point count with PNP sourcing outputs. See the AH32AN02T-5C for 32 NPN outputs or the AH64AM10N-5C for 64 digital inputs.
Output current and field wiring
Delta specifies 100 mA per output and 1 A per COM for resistive loads. Add up the current of loads that operate simultaneously within each common group. Follow the manual’s 24 V DC auxiliary supply diagram for UP and ZP. See AH power supplies when planning rack and field power.
Use the UC-ET010-24A cable with the UB-10-OT32A 32-point transistor terminal. For circuits that require relay contacts, Delta shows the UB-10-OR16A terminal with the UC-ET010-24C cable. For other wiring arrangements, see AH external terminals.
ISPSoft and output addressing
Add the module to its physical slot in HWCONFIG in ISPSoft. It occupies 64 Y bits in the PLC project. For example, if the start address is Y4.0, the last output is Y7.15. See AH expansion modules and Delta PLC software for rack and engineering information.
Manual and wiring diagram
AH64AN02T-5C wiring diagram · English AH500 manual. Specifications are on PDF page 71, wiring on pages 224–225, and output addressing on page 301. Browse the other documents under Delta AH PLC PDF files.
Editor’s Note
When buying used, check the T and 5C on the nameplate. The PNP module looks similar.
Inspect the pins and cable latches on both MIL connectors.
Ask whether the cables and external terminals are included.
On the bench, use a suitable low-current test load to check outputs on both connectors. Check the LEDs in both 32-bit display positions.
If an LED lights but the load stays off, check the auxiliary 24 V supply, commons and cable pairing first.
Related topics
For 32-point alternatives, see the AH32AN02T-5A with terminal block, AH32AN02T-5B with DB37 connector and AH32AN02P-5C with PNP outputs.
More from Delta · Delta PLC · Delta PLC accessories · Delta PLC and HMI manuals · Second-hand Delta products
External reference · Delta PLC and HMI Cable Selection Guide, section 2.2.8