Delta TP04P

Delta TP04P Keypad Operator Panels with Built-in PLC

Delta TP04P combines a 4.1-inch STN-LCD, monochrome 192 × 64-pixel display, physical keys and a built-in PLC. Machine status, keypad setpoint entry and control through the model's local I/O can be handled in one device. The family belongs to the PLC-integrated panel group under Delta TP panels and remote I/O.

Select TP04P by its complete ordering code, including digital I/O count, relay or transistor outputs, analog channels and temperature inputs. Depending on the application, it can serve machines requiring sequence control, setpoint entry and alarm indication. The screen project, PLC program and field wiring must match the same machine configuration.

Basic construction and installation

Standard TP04P models use a 24 V DC supply. The common 16TP1R, 32TP1R, 22XA1R and 21EX1R models have dimensions of 175.8 × 108.6 × 59.2 mm and a nominal panel cutout of 163 × 96 mm. Check mounting tolerances, panel thickness and rear terminal clearance against the applicable drawing. See Delta HMI mounting and power connections for related installation topics.

Menus and values are operated through numeric, direction and function keys. USB is used for program transfer, with two RS-485 channels for communication. The series description lists Modbus ASCII/RTU support. Confirm PLC program capacity and special-function limits against the exact hardware and applicable document revision.

Common relay-output models

Delta TP04P-16TP1R: Provides 8 digital inputs and 8 relay outputs. It can be considered for pushbuttons, limit switches, sensors and on/off control where analog measurement is not required.

Delta TP04P-32TP1R: Provides 16 digital inputs and 16 relay outputs. It offers more digital field points than the 16TP1R; compare terminal groups and PLC addresses with the existing project.

Delta TP04P-22XA1R: Combines 8 digital inputs, 8 relay outputs, 4 analog inputs and 2 analog outputs. Its voltage/current analog channels require the appropriate signal range, channel mode and application scaling.

Delta TP04P-21EX1R: Provides 8 digital inputs, 8 relay outputs, 2 analog current inputs, 1 analog current output and 2 Pt100 temperature inputs. Pt100 inputs and standard current inputs have different wiring and measurement functions.

Other variants and output technology

Family catalogs also list TP04P-16TP1T, TP04P-32TP1T, TP04P-22XA1T and TP04P-21EX1T transistor-output options. The corresponding R/T variants use different output technology, so check load wiring, common terminals and switching requirements separately. Replacing a relay model with a transistor version requires a review of the field wiring.

Older catalogs include TP04P-08TP1R with 4 digital inputs and 4 relay outputs. TP04P-20EXL1T is a special variant with load-cell and additional measurement functions. Do not apply the standard four relay models' specifications to it; use its dedicated operation manual.

Programming, communication and expansion

Configure panel pages and key functions with Delta TPEditor. Use Delta WPLSoft or Delta ISPSoft with confirmed model support for PLC logic. Back up the screen project and PLC program separately. Having one does not establish that the other can be recovered.

Check the USB driver, virtual COM connection and selected software target. For RS-485, match port function, station address, baud rate, parity and protocol to the connected device. When reviewing Delta PLC cables and HMI programming and HMC cables, confirm the electrical interface and pinout as well as the connector.

A standard TP04P's built-in I/O count cannot be increased by attaching PLC expansion modules. Exchanging data with other devices over communication requires a separate system design. A program copy card must also be distinguished from physical I/O expansion hardware.

Comparison with TP70P

The Delta TP70P family uses a 7-inch color touchscreen, while TP04P uses a monochrome display and physical keys. Compare TP70P-22XA1R for analog applications and TP70P-21EX1R for temperature-input applications. Matching I/O counts do not establish direct compatibility of the screen project or mechanical installation.

Editor's Note

Start by reading the rear label when buying a TP04P. Similar front panels can hide different digital, analog and temperature-input configurations. Obtain clear photographs of the complete model code and terminals before deciding.

Test every key, especially frequently used Enter, direction and numeric keys. Look for missed presses or double operation. Check contrast, backlight and readability; a lit display alone does not prove that the panel is healthy.

Before removing a working unit, back up both projects and record communication settings and analog scaling. If the source files are missing, confirm what can be uploaded before attempting an update or downloading a replacement program.

Check relay outputs with a light test load instead of relying on the clicking sound. Test analog channels at several known signal levels. Use a suitable simulator or verified sensor for Pt100 inputs; improvised wire links do not establish measurement accuracy.

For intermittent resets or communication failures, inspect the loaded 24 V supply, terminals and grounding first. Corrosion, loose connections and signal wiring routed beside power cables can produce similar symptoms. Once the supply is verified, inspect the board for contamination, overheating and damaged connections.

Before replacing a unit, compare output technology, channel counts, terminal functions and both projects. Clear photographs taken before disconnecting the original hardware are more useful than trying to reconstruct the wiring later.

Sources and PDF files

Use Delta TP panel files for series documents and Delta PLC and HMI manuals for the wider document collection. Select separate documentation for standard TP04P models and special variants such as 20EXL1T.

Related topics

Delta DVP PLC series · Delta PLC accessories · Delta HMI modules and accessories · Delta HMI communication peripheral units · Delta HMI files

Navigation: TP panels and remote I/O · Delta PLC models · Delta TP70P · Second-hand Delta products

External references

Delta DVP/TP catalog, 14 August 2024 (English) · TP04P-20EXL1T / TP70P-211LC1T special-variant operation manual (English)


Refine Search