Delta HMI Mounting and Power Connections
Delta HMI Mounting and Power Connections separates mounting hardware from power connection so mechanical and electrical compatibility can be checked. Technical tables dated 2007-08-20 define the product-generation boundary.
Delta HMI Mounting and Power Connections: The part does not replace the panel; it completes mounting, power, signal expansion, communication or programming. Check both connector ends and the supported HMI generation as well as the ordering code.
Delta HMI Mounting and Power Connections: Delta technical tables are the basis for the model distinctions on this page.
Delta HMI Mounting and Power Connections: Connection selection is based on DOP-A/AE/AS; use the exact model instructions. A cable or module is not interchangeable until the port standard on both the panel and the connected device has been verified.
When selecting Delta HMI Mounting and Power Connections, consider Delta HMI Digital I/O Expansion Modules, Delta HMI Ethernet Expansion Modules and Delta HMI Printer Expansion Modules together for display, software and communication duties.
When commissioning Delta HMI Mounting and Power Connections, programming and HMC cables, shared HMI power supplies and communication auxiliary units complete power, programming-cable and field connections within the same hardware generation.
Model distinctions for Delta HMI Mounting and Power Connections
DOP-SCLKAM5: HMI accessory or module in the mounting hardware. Selection is distinguished by panel mounting clamp; supported family: DOP-A/AE/AS; use the exact model instructions. Delta documentation at PDF pp.1–4,8–10 contains the comparison table for these codes.
DOP-CNPWRD: HMI accessory or module in the power connection. Selection is distinguished by removable power terminal; supported family: DOP-A/AE/AS; use the exact model instructions. Delta documentation at PDF pp.1–4,8–10 contains the comparison table for these codes.
A function name alone is insufficient for Delta HMI Mounting and Power Connections. Match supply rating, signal direction, connector type, cable length and supported panel generation to the applicable product row.