Delta HMI Communication Peripheral Units

Delta HMI Communication Peripheral Units selects USB-to-serial and serial communication converters by the electrical interfaces of the panel and PLC ports. Technical tables dated 2017-09-13 define the product-generation boundary.

Delta HMI Communication Peripheral Units: The part does not replace the panel; it completes mounting, power, signal expansion, communication or programming. Check both connector ends and the supported HMI generation as well as the ordering code.

Delta HMI Communication Peripheral Units: Delta technical tables are the basis for the model distinctions on this page.

Delta HMI Communication Peripheral Units: Connection selection is based on selected by panel and PLC port. A cable or module is not interchangeable until the port standard on both the panel and the connected device has been verified.

When selecting Delta HMI Communication Peripheral Units, consider Delta HMI Mounting and Power Connections, Delta HMI Digital I/O Expansion Modules and Delta HMI Ethernet Expansion Modules together for display, software and communication duties.

When commissioning Delta HMI Communication Peripheral Units, Delta HMI Printer Expansion Modules, programming and HMC cables and shared HMI power supplies complete power, programming-cable and field connections within the same hardware generation.

Model distinctions for Delta HMI Communication Peripheral Units

IFD6500, IFD6530: HMI accessory or module in the shared communication infrastructure. Selection is distinguished by USB. Delta documentation at PDF pp.32–34,45–48 contains the comparison table for these codes.

IFD8500-A: HMI accessory or module in the shared communication infrastructure. Selection is distinguished by serial communication, communication conversion. Delta documentation at PDF pp.32–34,45–48 contains the comparison table for these codes.

A function name alone is insufficient for Delta HMI Communication Peripheral Units. Match supply rating, signal direction, connector type, cable length and supported panel generation to the applicable product row.