Delta UC-PRG015-01A
Delta UC-PRG015-01A
Delta UC-PRG015-01A is a 1.5 m programming and data cable connecting a computer's USB-A port to the mini USB port of a compatible PLC. It supports program transfer, monitoring and maintenance connections. See Delta DVP programming cables and Delta PLC accessories for related products.
This model provides a direct USB-to-mini-USB data connection. It should not be treated as an RS-232 or RS-485 converter. Check the actual device interface, mini USB socket and supported computer connection before selection.
Connections and USB pin assignments
Delta's diagram shows USB-A pin 1 ↔ mini USB pin 1: +5 V, pin 2 ↔ pin 2: D−, pin 3 ↔ pin 3: D+, and USB-A pin 4 ↔ mini USB pin 5: GND. Both data conductors must be intact for communication.
Mini USB and micro USB are different connectors. Verify the socket shape before insertion. The diagram's +5 V connection belongs to the USB interface; follow the CPU hardware manual for its power requirements.
Device examples in manufacturer documentation
The cable selection guide shows UC-PRG015-01A mini USB connections for DVP12SE11R and DVP12SE11T in the Delta DVP-SE family. Ethernet and RS-485 ports on the same CPU require their own connection arrangements.
Delta AS300 documentation lists AS332T-A, AS332P-A and AS324MT-A. The cable guide also includes mini USB-equipped Delta AH500 CPU examples. These examples do not establish compatibility with every Delta PLC or HMI model.
Drivers, software and connection selection
The interface that the computer must recognise is the connected CPU's USB interface. Select its USB driver, operating system procedure and connection method from the CPU manual. Assigning an RS-232 converter driver to this cable does not resolve the connection.
For Delta ISPSoft projects, choose the correct device and connection path through Delta COMMGR. Use Delta WPLSoft only where supported by the relevant DVP CPU. Select AS programming software from the AS documentation; the cable code alone does not determine the engineering tool.
Differences from similar cable codes
UC-PRG030-01A is the 3 m USB-to-mini-USB version. UC-PRG015-02A and UC-PRG030-02A are 1.5 m and 3 m USB-A-to-USB-B cables respectively, with a different device-end connector.
UC-PRG020-12A is a 2 m USB/serial programming cable used with its own USB driver. UC-PRG030-10A provides a 3 m female DB9 to female DB9 serial connection. UC-PRG030-20A is a 3 m RJ45-to-RJ45 Ethernet cable. The suffix identifies the connection arrangement.
Editor's Note
If the computer does not detect the PLC, connect directly to a known-good computer USB port before investigating further. Remove intermediate hubs or extensions for comparison. Check PLC power and the physical condition of its mini USB socket as well.
Watch Device Manager while connecting the cable. If an unknown device appears, check the correct CPU USB driver. Where the device creates a COM port, record its number instead of selecting ports at random in the software.
If USB detection succeeds but communication fails, check the selected CPU model, COMMGR connection and software communication path in sequence. Detecting a USB device and accessing a PLC project are separate checks.
If moving the cable or connector interrupts communication, inspect for broken conductors near plugs, a loose socket and mechanical strain. Disconnect both cable ends before continuity testing. Avoid spreading contacts or shorting adjacent pins when probing D+ and D−.
Before maintenance, back up the program and necessary parameters from the PLC. Distinguish reading from writing to the controller; sending the wrong project can create a much larger problem. Where possible, test a used cable by reading a program and maintaining a stable online connection.
PDF manuals, USB drivers and software resources
Use Delta PLC accessories files for documents and software references, and Delta PLC and HMI manuals for CPU connection procedures. Match the USB driver to the connected CPU and operating system, rather than selecting it solely by the cable name.
Related topics
Delta DVP programming cables · Delta DVP communication cables · Delta DVP interfaces · UC-PRG030-01A
Return to Delta PLC accessories. Browse controllers in the Delta PLC category and available equipment under second-hand Delta products.
External references: Search the Delta Download Center using the CPU's complete model code for manufacturer documentation and driver resources.