Delta AS300
Delta AS300 PLC Series
Delta AS300 is a modular CPU series in the Delta AS PLC family with a 24 V DC supply and 128K steps of program capacity. Packaging machines, assembly lines and conveyors can use the CPU’s built-in I/O and add side-mounted modules as needed.
AS300 CPU models and output types
The AS332T-A and AS332P-A have 16 digital inputs and 16 digital outputs. The T model has NPN sinking outputs and the P model has PNP sourcing outputs.
The AS320T-B and AS320P-B have 8 digital inputs and 12 digital outputs. Their output types are NPN and PNP, respectively.
The AS324MT-A has 12 digital inputs and 12 digital outputs. It provides four differential input channels and four differential output channels. When selecting an encoder or servo drive, check the signal type at the relevant terminals against the wiring diagram.
The AS300N-A has 0 built-in digital inputs and 0 built-in digital outputs. Add expansion modules to provide the field I/O required by the machine.
Modules, power supplies and programming software
Delta specifies up to 32 expansion modules for an AS300 system. When choosing AS expansion modules, check the overall limit, the limits by module type and the power budget. See digital modules for sensors and loads, analog modules for voltage and current measurement, and AS specialty modules or CPU function cards for additional features. Check the available capacity on the AS power supplies page.
Use ISPSoft for programming and hardware configuration and COMMGR to set up the PC connection. Delta also documents DIADesigner for AS CPUs. For an existing machine, check the project version, CPU firmware and the port you plan to use. Select the appropriate Delta PLC cable for Ethernet or mini USB. For field communications, compare the CPU’s COM1 and COM2 RS-485 settings with the project.
OtomasyonAVM manuals · Delta PLC and HMI manuals. When using the AS hardware guides on the ISPSoft page, match the document edition to the CPU model.
Editor’s Note
Before buying a used CPU, ask for a label photo that shows the complete model suffix and hardware revision.
Back up the project, retentive data and network settings before replacing the CPU.
Check the load common and panel drawing when choosing between NPN and PNP outputs.
For the AS324MT-A, check the drive’s pulse input type and the differential terminal assignments in the wiring diagram.
Verify I/O addressing, status LEDs and communications in a controlled test before returning the machine to service.
Related Topics
Delta AS200 · AS500 motion controllers · Delta AH PLC · Delta PLC accessories
Delta PLC models · Second-hand Delta automation
External references · AS Hardware and Operation Manual · AS Programming Manual · AS Module Manual · AS CPU selection catalogue (English)