Delta AS320T-B
Delta AS320T-B PLC with 8 DI and 12 NPN outputs
The Delta AS320T-B is a modular PLC CPU in the Delta AS300 family. It runs on 24 V DC and has 8 digital inputs, 12 NPN transistor outputs and removable spring terminals. Program capacity is 128K steps.
I/O ratings and model differences
CPU supply range is 20.4–28.8 V DC. Inputs are addressed X0.0–X0.7 and outputs Y0.0–Y0.11. The NPN sinking outputs are rated for 5–30 V DC loads at 0.1 A per output and 1.2 A per common. For pulse applications up to 200 kHz, check the assigned output terminals and the drive’s input signal type.
The AS320P-B has the same I/O count with PNP outputs. The AS332T-A has 16 inputs and 16 NPN outputs, while the AS332P-A has 16 inputs and 16 PNP outputs. The AS324MT-A offers differential high-speed I/O. The AS300N-A has no built-in I/O.
Programming, cables and communication
Select the AS320T-B CPU in ISPSoft and use COMMGR to establish the connection. Use a Mini USB data cable or RJ45 Ethernet cable. For USB, check the Delta AS-series USB driver. See Delta PLC cables for connection information.
The CPU has one Ethernet port, two RS-485 ports (COM1 and COM2), a microSD slot and two optional function-card slots. CANopen requires the AS-FCOPM function card. See CANopen Builder for network configuration.
PDFs and technical documents
The archived AS-series manual appears as D06 in the OtomasyonAVM Delta PLC accessories files. See §4.6.5 of Delta’s 2024 hardware manual for AS320T-B wiring and 5014085601 for the multilingual installation sheet.
Editor's Note
Read the AS320T-B label first. The T and P housings look very similar.
For a used CPU, ask for photos of the removable I/O terminals. Check the springs, latches and terminals for damage or burn marks.
Before replacing the CPU, back up the program, CPU parameters, IP address and serial settings.
On the bench, get online with the CPU first. Then test the inputs and outputs separately with a suitable test load.
For motion axes, compare the pulse input type and axis settings. Measure the output signal before enabling mechanical movement.
Related topics
AS expansion modules · Digital I/O · Analog measurement · AS power supplies
Delta AS PLC · Delta PLC main category · PLC and HMI manuals · Used Delta equipment
External references
Delta AS Hardware and Operation Manual (EN) · AS320T-B / AS320P-B instruction sheet (EN and TR included)