Delta AS332P-A
Delta AS332P-A PLC CPU with PNP outputs
The Delta AS332P-A is a modular Delta AS300 PLC CPU with 16 digital inputs and 16 PNP transistor outputs. Its 128 k-step program capacity supports sequencing and positioning in packaging, conveyor and indexing machines.
Power, I/O and pulse outputs
The CPU runs on 24 V DC with a 20.4–28.8 V DC supply range. Input addresses are X0.0–X0.15, and output addresses are Y0.0–Y0.15. The PNP outputs source current to the load. The output circuit is rated for 5–30 V DC and up to 0.1 A per channel with a resistive load.
Terminals Y0.0–Y0.11 support pulse rates up to 200 kHz. Delta specifies pulse output for up to six axes with suitable configuration. Terminals Y0.12–Y0.15 are limited to 100 Hz. The CPU also supports six high-speed counter channels at up to 200 kHz, depending on configuration. Check the servo drive’s pulse input and the output commons against the wiring diagrams.
Built-in I/O uses a 40-pin MIL connector. Consider the UC-ET010-24D cable for field wiring and the UB-10-OR16B terminal module where relay outputs are required. Connect pulse signals to the appropriate CPU transistor outputs.
Programming and connection
Use ISPSoft for the project and COMMGR to select the PC connection. Connect by RJ45 Ethernet or mini USB with a UC-PRG030-01A data cable. If the computer does not detect the PLC over USB, check the driver and programming cable. Two built-in RS-485 ports are available for field communication.
Check the power budget for AS power supplies and AS expansion modules. Select digital I/O, analog measurement modules and function cards to suit the application.
Editor’s Note
Read the full AS332P-A code on the label.
Match the output commons, MIL cable and terminal module to the cabinet wiring.
Back up the PLC project, hardware configuration and IP settings before replacement.
On the bench, check one input and one output with a small test load before connecting the machine.
When using servo pulse control, measure the pulse and direction signals at the drive input.
Related topics
The AS332T-A is the 16/16 I/O NPN variant. The AS320P-B has eight inputs and twelve PNP outputs. See the AS324MT-A for differential pulse applications and the AS300N-A for a system built around expansion modules.
Delta PLC accessory PDFs · AS Series Operation Manual (EN, 2018 archive edition)
Delta AS PLC series · Delta PLC models · Delta Automation
External reference · Delta AS Series Hardware and Operation Manual (EN, 2024)