Delta AS300N-A

Delta AS300N-A modular PLC CPU

Delta AS300N-A is a Delta AS300 modular PLC CPU with 0 built-in inputs and 0 built-in outputs. It runs on 24 V DC and has a 128k-step program capacity. It provides Ethernet, Mini USB and two RS-485 ports (COM1 and COM2).

Adding inputs and outputs

Wire field devices through digital I/O and analog modules selected for the project. There is no MIL connector for onboard I/O. The AS300 supports up to 32 expansion modules and up to 1,024 physical I/O points, depending on the configuration. Size the AS power supply for the selected modules.

Programming and communications

Open the project in ISPSoft and configure the PC connection in COMMGR. Use a Mini USB data cable or Ethernet cable. Check COM1/COM2 for serial Modbus and IP settings for Ethernet. CANopen requires the AS-FCOPM function card. Use CANopen Builder where the project requires it.

Editor’s Note

When buying a used CPU, look for the full AS300N-A code on the nameplate.
Back up the existing project and record the CPU firmware version.
Record the module order and I/O addresses from the original project.
On the bench, connect to the CPU, configure one expansion module and monitor an input.
Before machine testing, check the output loads and safe operating conditions.

PDFs and related models

Delta AS PLC PDF files · AS Hardware and Operation Manual (EN, 2021)
Related models AS320T-B · AS320P-B · AS332T-A · AS332P-A · AS324MT-A

More Delta pages Delta AS PLC series · Delta PLC · PLC accessories · Used Delta products

External references Delta installation sheet (includes TR and EN, 2024) · Delta AS Hardware and Operation Manual (EN, 2024)