6ES5 375-0LC31

Siemens 6ES5 375-0LC31 SIMATIC S5 375 EEPROM Memory Submodule 8 KB

The Siemens 6ES5 375-0LC31 is a plug-in 375 memory submodule with 8 KB (8,192 bytes) of EEPROM for SIMATIC S5. Siemens lists it in the CPU memory tables for the S5-95U, S5-100U and S5-115U. It uses byte organization and is selected on the programmer with programming number 211.

In a CPU slot, it holds a nonvolatile copy of the STEP 5 program. In compatible S5 communications modules, it can hold serial interface settings or message texts. Siemens lists the 375-0LC31 for the 6ES5 521-8MA21 and 6ES5 521-8MA22 CP 521 SI modules and for the CP 523.

CPU and communications module compatibility

The S5-95U accessories table lists the 375-0LC31 alongside the 6ES5 095-8MA04 base unit and 6ES5 095-8MB03 SINEC L2 variant. The 6ES5 090-8MA01 S5-90U has a separate CPU memory table with 375-8LC11 and 375-8LC21 EEPROM part numbers.

The S5-100U manual lists the 375-0LC31 as a 4,096-statement STEP 5 submodule among the accessories for the CPU 100, CPU 102 and CPU 103. That is the catalog’s statement rating for the 8 KB physical capacity. Check the program limit for the CPU version and the size of the backup before loading it.

S5-115U Table 2-8 lists the EEPROM for the CPU 941, CPU 942, CPU 943 and CPU 944. The S5-115H and S5-115F manuals also list the 375-0LC31. Check the applicable system manual for the CPU slot and program-loading procedure.

EEPROM, EPROM and programming numbers

EEPROM can be erased and rewritten electrically. The 375-0LA15 is an 8 KB EPROM, while the 375-0LA21 is a 16 KB EPROM. Within the EEPROM range, Siemens lists the 375-0LC31 at 8 KB with number 211 and the 375-0LC41 at 16 KB with number 212.

Use a compatible PG and memory programming hardware to write the submodule. S5 PG cables such as the 6ES5 734-2BD20 provide online access to the CPU. For the memory submodule, check that the programmer shows EEPROM and number 211. Read the blocks back after writing and compare them with the source file.

Editor’s note

Read the full part number on the 375 housing. The 0LC31 and 0LC41 look similar. Match the capacity and programmer selection number to the label and equipment manual.

Read the contents before erasing the module. Save its blocks to a separate file. Back up the current program in the CPU separately.

Keep CPU and CP backups separate. An EEPROM from a CP 521 SI or CP 523 may hold DB1 interface settings and printer messages. Record the card number and slot with the file.

Switch off power before fitting the submodule. Before restarting, check the procedure for loading from the submodule into the CPU. The Siemens S5 system page helps locate the relevant manuals.

Ask for the write test on a used submodule. When buying used Siemens parts, ask whether the module was read, erased, written and verified. To offer a module for sale, send the full part number, quantity, condition, label photo and asking price to otomasyonavm@gmail.com.

OtomasyonAVM resources and PDFs

SIMATIC S5 memory modules · S5-90U and S5-95U CPU and module information

OtomasyonAVM S5-90 PDF archive · OtomasyonAVM S5-115 PDF archive

SIMATIC S5-90U/S5-95U system manual, S5-95U memory ordering table

SIMATIC S5-115H system manual, memory types and programming number 211

Related topics

6ES5 375-0LA15, 8 KB EPROM · 6ES5 375-0LA21, 16 KB EPROM

6ES5 521-8MA22, CP 521 SI serial communications module

Browse the S5 range

Siemens SIMATIC S5 PLCs › S5 memory modules

External references

Siemens 6ES5 375-0LC31 data sheet, 8 KB EEPROM

Siemens S5-115U system manual, Table 2-8 CPU compatibility · S5-100U memory ordering table · S5-115F memory table

Siemens CP 521 SI manual, plug-in memory submodules · Siemens CP 523 memory ordering table