6ES5 090-8MA01
Siemens SIMATIC S5-90U 6ES5 090-8MA01 Compact PLC
The 6ES5 090-8MA01 is a compact SIMATIC S5 controller with a CPU, digital inputs and relay outputs in one housing. It reads sensor and push-button signals, runs the machine sequence in STEP 5 and switches the output contacts.
Power supply and onboard I/O
The CPU requires 115/230 V AC mains power. The digital inputs are rated at 24 V DC, and the controller provides a separate 24 V DC / 100 mA sensor supply. If the field circuit needs more current, size a separate S5 field power supply for the load.
Two of the 10 digital inputs can be assigned special functions in DB1. I 33.0 can serve as an interrupt input, and I 33.1 as a hardware counter input. Each of the six relay outputs has its own contact pair. At 250 V AC, Siemens specifies a maximum of 3 A for resistive loads and 0.5 A for inductive loads. Use the inductive rating for contactor and valve coils.
STEP 5, program memory and backup battery
Programming and diagnostics use a 15-pin, 20 mA TTY PG port. Match the S5 programming cable and any interface converter to the PC connection. If the PG port is used for SINEC L1, record the existing S5 communications connection and DB1 settings before removing the controller.
The CPU has 4 KB of user memory. The backup battery retains RAM contents when power is removed. Check the order number of any fitted EPROM or EEPROM module. Siemens lists the 6ES5 375-8LC21 4 KB EEPROM for this model.
IM 90 expansion and spare selection
Revision A02 introduced support for the IM 90 (6ES5 090-8ME11), which connects up to six S5-100U I/O modules. Check the order of the fitted S5 expansion modules and identify their bus carriers. The screw-terminal 6ES5 700-8MA11 bus unit is one example from this family.
Expansion options include the 421-8MA12 for digital inputs. For digital outputs, examples include the 451-8MR12 relay module and the 451-8MA11 solid-state output module. Applications with analog signals use a suitable external S5 analog module. Match the order number, signal type and field address when sourcing a spare module.
The 6ES5 095-8MA01, 6ES5 095-8MA02 and 6ES5 095-8MA03 are separate S5-95U models. For a direct spare, check the full 090-8MA01 code and hardware revision on the nameplate.
Editor’s Note
The S5-90U has no low-battery LED. Before disconnecting a working CPU, use STEP 5 to back up the program and DB1 if present. On a used unit, bench-test all six relay outputs in both states with a suitable test load. If an output LED lights but the load fails to switch, check the relay contact separately.
Related topics
S5-90U PDF archive · S5-90U models · Siemens SIMATIC S5 · Used Siemens equipment
References
Siemens S5-90U manual, EWA 4NEB 812 6064-01a (German). Technical data are in Appendix A-2 and A-3. The A02/A03 revision table is in Appendix H-1.
Siemens S5-90U/S5-95U system manual, 6ES5 998-8MA22 (English). Covers 6ES5 090-8MA01 from hardware revision A02.
Siemens 6ES5090-8MA01 data sheet (English, PLC2Day copy) · Siemens ST 50 catalog, page 2-30 (Russian).