Delta AHCPU510-EN

Delta AHCPU510-EN | Ethernet PLC CPU with 64K Steps

The Delta AHCPU510-EN is a standard Delta AH500 CPU module with built-in Ethernet. It provides 64K steps of program capacity, 32,768 D data registers and support for 1,280 physical I/O points through I/O modules. The system supports one main backplane and one extension backplane. It suits machine control panels that require an HMI connection and several I/O modules.

Ethernet, serial port and SD card

The built-in 10/100 Mbps Ethernet port supports Modbus TCP client and server communications. Delta specifies 32 connections for each role on this model. The single serial port supports RS-232, RS-422 or RS-485, depending on the application. For Modbus RTU devices, match the station address, baud rate and parity. The Mini USB port provides a programming connection. The SD card slot supports system backup and restoration.

ISPSoft connection and rack configuration

Select AHCPU510-EN in the ISPSoft project. Set up the Ethernet or USB connection in COMMGR. For Ethernet, check the CPU’s configured IP address. For USB, check the data cable and driver. In HWCONFIG, match the backplane and physical module order to the project.

Rack supply options include the AHPS05-5A (100–240 V AC) and AHPS15-5A (24 V DC). Check the power supply, expansion modules and I/O addresses together when planning the rack. The AH16AM10N-5A provides digital inputs, the AH32AN02T-5C provides digital outputs and the AH04AD-5A provides analog inputs.

Manuals and PDF downloads

AH500 Hardware and Operation Manual — AHCPU510-EN specifications · English · 2023-04-12. See printed pages 2-4 and 2-5 for capacities and ports, 2-10 for the front panel, section 6.6.1 for connection setup and chapter 7 for SD card operations. More documents are available in the Delta AH PLC PDF library.

Editor's Note

When buying a used CPU, check the full AHCPU510-EN part number and the EN suffix. Inspect the RJ45 socket and rear backplane connector.

Before replacing the CPU, back up the ISPSoft project, hardware configuration and retained data that the application needs.

If Ethernet communication fails, start with the LINK LED, the configured IP address and the connection selected in COMMGR.

If the CPU is running and an RS-485 device does not respond, compare the serial port mode, station address, baud rate and parity with the field device.

Before restoring from an SD card, verify that the backup belongs to the correct machine and that the rack order matches the installed hardware.

Related models and topics

The AHCPU510-RS2 provides the same 64K-step capacity with two serial ports. Ethernet models include the 32K-step AHCPU500-EN, 96K-step AHCPU511-EN and 128K-step AHCPU520-EN. See AH digital modules for field signal options.

More from OtomasyonAVM
Delta AH PLC series · Delta PLC software · Delta PLC · Used Delta equipment

External reference
Delta Electronics AH500 manual — distributor copy