Delta AHCPU511-EN
Delta AHCPU511-EN – 96K-Step Ethernet PLC CPU
The Delta AHCPU511-EN is an advanced rack-mounted PLC CPU in the Delta AH500 family. It provides 96K program steps (384 KB), supports up to 1,280 local I/O points and has a D0–D49151 data register range. Its built-in Ethernet port suits machines that exchange data with operator panels such as the Delta DOP-100, field devices and supervisory systems.
Rack capacity and module selection
The CPU supports one main rack and one expansion rack, with up to 20 modules in total. Calculate the physical I/O count from the selected AH digital modules and AH analog modules. See AH expansion modules for rack planning. Check the rack power budget using the AHPS05-5A for a 100–240 V AC cabinet supply or the AHPS15-5A for a 24 V DC supply.
Ethernet and serial communication
The front panel has 10/100 Mbps Ethernet, mini USB, an SD card slot and one RS-232/RS-422/RS-485 serial COM port. Ethernet supports Modbus TCP and EtherNet/IP. Serial communication supports Modbus RTU and ASCII.
EtherNet/IP supports Scanner and Adapter roles. Delta specifies up to 64 CIP and 32 TCP connections for EtherNet/IP I/O on this model. Modbus TCP has its own connection limits. See AH communication modules when the project needs an additional network interface.
Programming with ISPSoft
Create the PLC project in ISPSoft and manage the PC connection through COMMGR over Ethernet or mini USB. For a USB connection, check the Delta driver and the USB (Virtual COM) setting in COMMGR. In HWCONFIG, match the CPU code, main and expansion racks, slot order and I/O addresses to the existing project. See Delta PLC software for other engineering tools.
Manual and PDF archive
AHCPU511-EN – AH500 Hardware and Operation Manual (EN) · PDF pages 42–43 cover CPU capacity and ports, page 46 shows the EN series front panel, and pages 333–335 cover the USB and COMMGR connection. See the CPU comparison table in the Delta AH catalogue and Delta AH PLC PDF files for other series documents.
Editor's Note
When buying a used CPU, check the complete AHCPU511-EN nameplate. The EN suffix matters on machines that rely on the built-in Ethernet port.
Inspect the Ethernet, mini USB and serial COM sockets. If possible, test both Ethernet and USB connections in ISPSoft on the bench.
Before replacement, back up the PLC project, retentive data settings and rack layout.
Record the IP address, subnet mask, serial settings and any EtherNet/IP Scanner or Adapter configuration.
After transferring the project, verify HMI communication and I/O mapping separately. Follow the machine’s commissioning procedure before switching to RUN.
Related models and topics
The AHCPU511-RS2 offers the same 96K program capacity with two serial ports. The AHCPU510-EN is a basic 64K-step Ethernet CPU. The AHCPU501-EN and AHCPU521-EN are advanced models with 48K and 192K steps respectively. For Derell-based projects, see Derell PLC C series.
Delta AH PLC series · Delta PLC · Second-hand Delta equipment
External references
Delta EtherNet/IP Operation Manual (EN), section 3.2.1 · Delta Electronics AH Series Catalogue (EN)