what is timer?

Controlling delays, operating periods and repetition
A timer relay determines when an output operates, how long it remains active or how often it repeats. Waiting after a start command, keeping a fan running after a command ends and repeating a lubrication cycle are different timing tasks. Choosing the right device therefore depends on the required operating sequence, as well as the number of seconds.
A timer relay generally contains a power-supply section, timing circuit, setting controls and output stage. Some models begin timing when power is applied. Others remain powered and start timing from a separate control input. Whether the output switches on, switches off or begins another cycle at the end of the interval depends on the selected function. Timer relays do not all behave in the same way when time expires.
For example, an output becoming active 5 seconds after a start command is an on-delay operation. An output activating immediately and switching off after running for 5 seconds is an interval operation. Both settings are 5 seconds, but the machine behaves differently. The manufacturer’s timing diagram is therefore as important as the displayed setting.
The output may use relay contacts or a semiconductor switching device. A contact’s current rating does not establish that every motor or inductive load can be connected directly. Depending on the load and manufacturer ratings, a contactor or suitable power stage may be required. The timer handles timing; the motor’s other control and protection requirements must also be addressed.
Editor’s note: Do not confuse removal of the control signal with removal of the timer’s supply. Many off-delay timers remain powered while their control command is removed. A true off-delay timer designed to provide a delay after supply removal uses a different arrangement. The wiring and timing diagrams should make this distinction clear.
Timing functions and operating arrangements
The main topics below describe different selection criteria. On-delay and off-delay describe operating functions; analog and digital can describe the setting method; and relay and solid-state describe output arrangements. A single device can therefore be digital, multifunctional and equipped with relay contacts. These categories are not mutually exclusive.
Simple timer relays
These perform one basic timing task, such as on-delay, off-delay or a timed output interval, depending on the model. A single-function unit may be sufficient for a panel that only needs a delay after a start command. “Simple” does not necessarily mean that the output activates immediately and switches off when time expires.
Multifunction timer relays
A multifunction timer allows different timing modes to be selected on the same device. It might provide on-delay in one application and flasher operation in another. However, multiple functions do not necessarily mean multiple outputs. Check the number of independent channels, whether their settings are independent and which outputs the selected function controls.
Countdown and counting timers
Distinguish counting time from counting events. A countdown timer works from a preset duration towards zero, while an event counter counts products or pulses. Some instruments combine these capabilities. Producing an output after 30 seconds and producing one after 30 products are different tasks; verify which quantity the device actually counts.
Flasher timer relays
These repeatedly alternate the output between ON and OFF. A flashing indicator or a suitable intermittent-operation system are examples. ON and OFF periods may be equal or independently adjustable. Stopping after a fixed number of repetitions is not a universal feature: many flashers continue cycling while their enabling condition remains present.
Programmable timer relays
These allow multiple periods, operating sequences or conditions to be configured. An application might require a waiting period, a defined operating period and then a rest period. “Programmable” does not imply the full capabilities of a PLC. Compare the supported steps, inputs, outputs and behavior after a power interruption with the actual application requirements.
On-delay timer relays
Timing begins when the starting condition occurs, and the output activates after the preset delay. For example, a second item of equipment may start a few seconds after the initial command. Timing may be initiated by supply application or a separate control input. Check the timing diagram to establish what happens if the command disappears before the delay expires.
Off-delay timer relays
After the control command is removed, the output remains active for the preset period before switching off. A fan continuing to run after a process finishes is an example. A continuously powered off-delay timer with a control input differs from a true off-delay timer triggered by supply removal. Establish which signal will be removed before choosing the device.
Star-delta timer relays
In a suitable motor-starting arrangement, these manage the star operating period and transition to delta. The transfer interval between releasing the star output and activating the delta output matters. The timer is only one part of the starter: the contactor arrangement, interlocking and the motor’s suitability for star-delta starting must be considered together.
Real-time clock (RTC) timer relays
These operate according to the time of day and calendar, rather than simply measuring time from a command. Switching lighting at defined weekday hours is one example. Daily or weekly scheduling, channel count and clock backup during a power interruption depend on the model. “Ten minutes after a command” and “every day at 18:00” are different requirements.
Pulse-generating (PWM) timer relays
A repeating operating ratio can be established using the pulse duration and the pause between pulses. For example, 2 seconds ON followed by 8 seconds OFF gives a 10-second period and a 20% duty cycle. However, not every cyclic timer can generate high-frequency PWM. Check switching capability and load compatibility; these devices do not replace a general-purpose AC motor drive.
Solid-state timers
With a genuine semiconductor output, electronic devices switch the load instead of moving contacts. Electronic timing circuitry does not itself establish that the output is semiconductor-based; it may use relay contacts. Read the output specification separately. For a solid-state output, AC/DC compatibility, leakage current, voltage drop and load limits are important selection factors.
Mechanical and motor-driven timers
These use mechanisms such as motors, gears and cams to establish timing or a clock-based schedule. Mechanical movement does not guarantee timekeeping during a power interruption. A mains-synchronized time switch without power reserve stops advancing during an outage. Retaining a setting, retaining a mechanism’s position and continuing to keep time are separate capabilities.
Stopwatches
A stopwatch measures elapsed time between a start and finish. It can be used to observe a machine cycle, compare movement durations or conduct a production time study. Measuring an interval is distinct from automatically switching a load when a preset time expires. If the measuring instrument needs a control output, verify that this feature is actually provided.
Analog timer relays
The time is commonly set using a rotary knob, scale and range selector. An analog setting does not establish that the device is mechanical or controlled by an external analog signal; many models use electronic timing circuits. A suitable range may be selected in minutes, for example, and the knob used to set the duration. Check the actual operating time when precise setting matters.
Digital timer relays
Time and function settings are generally entered using a numeric display and buttons. Clearly visible settings, elapsed or remaining-time indication and, on supported models, setting locks can make operation easier. However, a 0.01-second display does not establish a total timing error of 0.01 seconds. Display resolution, setting accuracy and repeatability are separate specifications.
Choosing a device for the application
First describe the intended operation in one sentence: “Wait 3 seconds after the command, then activate the output” or “Continue running for 20 seconds after the command ends.” Then establish supply voltage, starting method, timing range, output type and load characteristics. Panel mounting, socket arrangement and environmental conditions complete the selection.
Read the time unit and selected range together. The same knob position produces different results on a seconds range and a minutes range. Check the function, initial state, output at timeout and reset behavior against the actual operating sequence. Devices do not all reset, pause or retain their timing state in the same way when power is interrupted.
When investigating a fault, examine more than the time setting. Check supply stability, actual control-input changes, output status and the load circuit separately. An illuminated indicator alone does not prove that the load is receiving power. Replacing the timer will not automatically resolve a fault in an external contactor or the wiring.
Questions and detailed application guides
What is a timer relay and how does it work? explains the sequence from triggering to timing and output operation. What are the main components of a timer relay? focuses on the sections that perform these tasks.
In which types of electrical circuits are timer relays used? compares application areas. What are the types of timer relays and what is each used for? brings the different operating arrangements together.
What is the difference between a time relay and a timer? discusses terminology and function. Continue with How is a timer relay selected and installed? when choosing an appropriate device.
How are timer relay settings made and what do they include? covers time, range and function settings. If operation differs from expectations, How are timer relay faults detected and rectified? helps explain the checking sequence.
How can a timing circuit be created using a timer relay? considers implementation in a circuit. How can timer relays make automation processes more efficient? focuses on organizing waiting periods and repeated operations.
Timer relay models and prices: Compare operating functions, supply requirements and output specifications alongside the timing range.
Refine Search
- How are time relay faults detected and rectified?
- How are time relay settings made and what do they include?
- How can a timing circuit be created using a time relay?
- How can time relays be used in automation systems to make processes more efficient?
- How is a time relay selected and installed?
- In what types of electrical circuits are time relays used?