6ES5 188-3UA11

Siemens 6ES5 188-3UA11 S5-135U/155U Central Rack

The Siemens 6ES5 188-3UA11 is a 21-slot central rack for SIMATIC S5-135U/155U. Its backplane provides the electrical connections between the CPU and installed modules. The CPU is ordered separately. See the Siemens S5 PLC guide for the system family and the S5 rack section for other chassis types.

Power supply and rated values

Siemens’ edition 03 system manual pairs this rack with the fan-cooled 6ES5 955-3LC41 power supply. The manual specifies a selectable 120/230 V AC, 50/60 Hz input and a main output of 5.1 V DC at 18 A. The auxiliary outputs are rated 24 V DC at 1 A and 15 V DC at 0.5 A. Parts listings also describe the input as 230/115 V AC. When inspecting used PLC power supplies, check the fitted unit’s nameplate and voltage selector position.

The 6ES5 188-3UA12 is the later AC-input model rated at 18 A on the 5 V rail. Siemens pairs it with the 955-3LC42. The 6ES5 188-3UA21 has an AC input and a 40 A rating on the 5 V rail. The 6ES5 188-3UA32 has a 24 V DC input and an 18 A rating on the 5 V rail. Match the full order number, input type and power supply when choosing a spare rack.

CPU, slot assignments and expansion

When selecting a used PLC CPU, verify the CPU order number in the existing system. Siemens assigns specific slots to processors such as the CPU 922, CPU 928 and CPU 948. Record each installed module’s slot before removal and check the replacement layout against the manual’s slot table.

If the system has an expansion rack, record the order numbers of S5 interface modules such as the IM 304, along with the connecting cable identifiers. The interface pairing between the central rack and an 183U, 184U or 185U expansion unit depends on the installed hardware.

Buying and testing a used rack

Ask for photos of the rack and power supply nameplates, backplane connectors and fan assembly. Confirm separately whether the CPU, battery and fan assembly are included. Inspect the backplane for corrosion and signs of solder rework, as you would with other used electronic boards. If a test record is available, check which slots and digital input modules were tested.

Editor’s note
Ask for a test record that shows the 5 V rail and fan status with a compatible module load. An illuminated 5 V O.K. LED at idle shows the condition at that moment. Verify that the supply label reads 955-3LC41 even if the rack label reads 188-3UA11.

If you have this rack for sale, send photos of the rack and its labels to otomasyonavm@gmail.com.

Siemens S5 PDF archive

See the shared Siemens S5 PDF archive for general S5 documentation. Page 4-4 of the edition 03 manual below identifies the power supply for this rack.

Related topics

6ES5 188-3UA22 central rack · 6ES5 955-3LF41 40 A power supply · 6ES5 955-3NC42 power supply with 24 V DC input

References

Siemens S5-135U/155U System Manual, edition 03, p. 4-4 · 955-3LC41 technical data, p. 4-54 onward · Siemens System Manual, edition 07, chapters 2 and 4 · Adegis parts list, PDF p. 3