6ES5 188-3UA22
Siemens 6ES5 188-3UA22 — SIMATIC S5-135U/155U Central Rack
The Siemens 6ES5 188-3UA22 is a 21-slot central controller rack (CC) for the S5-135U/155U in the SIMATIC S5 range. Its backplane connects the CPU, I/O and interface modules. In the S5 rack range, this is a main rack fitted with a fan-cooled power supply. The CPU is selected separately.
Power supply and mounting
Siemens specifies the 6ES5 955-3LF42 power supply for this order number. The input is selectable between 120 and 230 V AC. The main output is rated 5 V DC / 40 A, with 5.1 V DC listed in the detailed specification. The auxiliary outputs are 15 V DC / 2 A and 24 V DC / 2.8 A. When sourcing a spare, compare the full nameplate code against the S5 power supply listings.
Keep the fan intake and exhaust paths clear when mounting the rack in a cabinet. Before connecting mains power, check the voltage selector and protective earth connection against the Siemens wiring diagram. 40 A is the rated output current of the 5 V rail.
Related order numbers
The 6ES5 188-3UA12 uses the 6ES5 955-3LC42 with the same AC input options and an 18 A output rating. The 6ES5 188-3UA32 uses the 6ES5 955-3NC42 with a 24 V DC input and an 18 A output rating. The 6ES5 188-3UA21 is also a 40 A variant. For a rack replacement, check the full suffix and the fitted power supply nameplate together.
CPU, slot assignments and expansion
Use the Siemens slot assignment table for processors such as the CPU 928B or the CPU 948 used in an S5-155U configuration. The processor version determines how many slots it occupies and which S5 memory card or submodule it accepts. Record the slot and address settings before transferring digital input, digital output or analog I/O modules. Check the electrical slot assignment as well as the physical fit.
If the installation has an 183U expansion rack, record the interface module codes at both ends and identify the S5 cable type. If the distributed layout uses an IM 304, verify its counterpart and cable as a pair. Also document the slots and connections of the existing communications modules before dismantling the rack.
Buying a used rack
Ask for separate photos of the rack and power supply nameplates. Check the backplane sockets for bent contacts or corrosion, the card guides for damage and the battery compartment for leakage. Inspect the fan assembly and the card locking bar. Confirm separately whether the CPU, memory and battery are included.
Editor’s Note
Ask for a bench test record showing that the 5 V rail stays stable and the fan alarm stays clear with the rack running under a representative module load. Check that record alongside the green “5V o.k.” indicator on the front panel.
PDF archive
See printed pages 4-2–4-8 for the rack and slot layout and 4-19 and 4-51–4-53 for the power supply ratings. Shared Siemens SIMATIC S5 PDF archive
Related topics
About Siemens S5 PLCs · SIMATIC S5 function modules
Navigation · S5 central units and CPUs · Siemens SIMATIC S5 PLC · Used Siemens automation equipment
References
Siemens S5-135U/155U System Manual, C79000-G8576-C199-07 (EN)
Siemens S5-135U/155U Supplement to the Manual, C79000-Z8576-C199-01, p. 1 (EN)