6ES5 955-3LC41
Siemens 6ES5 955-3LC41 SIMATIC S5-135U/155U Power Supply
The Siemens 6ES5 955-3LC41 is a fan-cooled PS 955 rack power supply for S5-135U/155U central controllers and specified EU 183U/185U expansion units in the SIMATIC S5 family. It has a selectable 120 or 230 V AC input. The main rail is rated at 5.1 V DC / 18 A (±0.5%). The auxiliary rails are 15 V DC / 0.5 A and 24 V DC / 1 A.
The supply powers the modules in its S5 rack and provides airflow through three fans. If several modules lose power together, start with the rack supply. If only one expansion unit is affected, check its local supply and the S5 interface module connection separately.
Mains selection and output checks
The 120 V setting accepts 93–132 V AC. The 230 V setting accepts 187–264 V AC. The frequency range is 47–63 Hz. At rated load the input current is 2.5 A RMS at 120 V and 1.5 A RMS at 230 V. Isolate the mains and verify that the circuit is de-energized before checking the wiring and connectors, voltage selector and protective earth.
The 5.1 V and 15 V rails are regulated. If a CPU 928B or CPU 948B shows symptoms of supply loss, check the 5.1 V rail under load in a compatible rack before replacing the CPU. The front test sockets marked 3 V = 18 A provide a voltage indication of 5.1 V rail current for temporary testing.
The 1 A rating of the 24 V rail is shared between the rear X2 connector and the front terminals. Use the cabinet drawings to check the total load if this rail powers sensors for digital inputs or field loads for digital outputs. Voltage low refers to the external load-voltage monitoring input. 24V o.k. shows the status of the supply’s own 24 V output.
Rack assignments for the 3LC41
Siemens’s C199-03 manual lists the 3LC41 with the 6ES5 188-3UA11 central controller and the 6ES5 183-3UA13 and 6ES5 185-3UA12 expansion units. The C199-07 edition lists the 6ES5 955-3LC42 with the 6ES5 188-3UA12, 6ES5 183-3UA13 and 6ES5 185-3UA13. Check the full rack number and alarm jumper settings when assessing a spare.
The 6ES5 955-3NC41 is also rated at 18 A and takes a 24 V DC input. The 6ES5 955-3LF41 takes 120/230 V AC and has a 40 A main output. The 6ES5 955-3LC14 is another AC-input 18 A supply. Compare the full order number, input type, rack and auxiliary outputs when selecting a replacement.
Fan alarms and memory backup
If one fan stops, its Fan 1, Fan 2 or Fan 3 LED lights and the other two fans speed up. If all three fan LEDs flash while Alarm is lit, check the filter and air path. The F–R jumper controls the shutdown response to a fan fault. The Siemens spare parts list shows the 6ES5 988-3NB41 spare fan for this series.
MB low points to the lithium backup battery or external backup supply. RB low points to the rechargeable battery. On a central controller or EU 185U, check the backup arrangement, the installed S5 memory card and the program backup before removing the power supply.
Editor’s note
Get clear photos of the 3LC41 suffix and the rack label. If you are considering an 18 A 3LC42, pay particular attention to the central controller and EU 185U suffixes.
A spare from stores may still have its 120/230 V selector set for the previous installation. Check it against the cabinet supply before connecting the mains.
If the mains is present and the output LEDs are dark, trace the EN/UH enable circuit on the cabinet drawings. This shows which conditions must be met for the supply to run.
If all three fan LEDs flash together, start with the filter and air inlet. If one fan LED stays on, check that fan and its connection.
For a used power supply, ask for a loaded 5.1 V reading, checks of the 15 V and 24 V rails, and a fan alarm test in a compatible rack. Record the battery status and program backup before a planned swap.
OtomasyonAVM resources and PDFs
+ SIMATIC S5 power supplies · Siemens S5 PLC overview
+ OtomasyonAVM shared SIMATIC S5 PDF archive
Related topics
+ 6ES5 955-3LC42 · AC-input 18 A power supply and rack assignments.
+ 6ES5 955-3NC41 · 24 V DC input and 18 A main rail.
+ 6ES5 188-3UA11 · Central controller documented with the 3LC41.
To offer a 3LC41 for sale, email the nameplate photo, quantity and test status to otomasyonavm@gmail.com.
Navigation
+ S5 power supplies · S5 racks · SIMATIC S5 · Used Siemens equipment
External references
+ Siemens S5-135U/155U System Manual, C199-03 · 3LC41 rack assignments, p. 4-21.
+ 3LC41 input and output ratings, C199-03 · Siemens manual, pp. 4-54–4-56.
+ Siemens S5-135U/155U System Manual, C199-07 (PDF) · 3LC42 comparison, p. 4-19.
+ Siemens spare parts list, C199-03 · 6ES5 988-3NB41 fan.