6ES5 955-3LF41
Siemens 6ES5 955-3LF41 SIMATIC S5-135U/155U Power Supply
The Siemens 6ES5 955-3LF41 is a fan-cooled SIMATIC S5 power supply for the S5-135U/155U central controller and a specific EU 185U expansion rack. Its front-panel selector sets the input to 120 or 230 V AC, 50/60 Hz. It supplies 5.1 V DC at 40 A on the main rail, with auxiliary outputs of 15 V DC at 2 A and 24 V DC at 2.8 A.
In the cabinet, the 3LF41 converts the incoming AC supply into the system voltages used by the SIMATIC S5 rack. Three fans move cooling air through the assembly. The 6ES5 955-3LC41 has the same AC input options and an 18 A main rail. The 6ES5 955-3NF41 has a 40 A main rail and takes 24 V DC at its input.
Which racks use the 3LF41?
Edition 03 of the Siemens manual pairs the 3LF41 with the 6ES5 188-3UA21 central controller and the 6ES5 185-3UA32 EU 185U. If the cabinet has several S5 expansion racks, identify the one that lost power and read its nameplate. The 6ES5 955-3LF42 is also a 40 A AC-input supply. Edition 07 lists that suffix with the 6ES5 188-3UA22 central controller and the 6ES5 185-3UA33.
The S5-135U/155U family includes processors such as the CPU 928A, CPU 947 and CPU 948. For a power supply replacement, check the complete S5 rack order number alongside the label on the installed supply.
Input selector and output limits
The input range is 93–132 V AC at the 120 V setting and 187–264 V AC at the 230 V setting. At rated load, Siemens specifies 4.5 A RMS at 120 V and 2.6 A RMS at 230 V. The main output is rated at 5.1 V DC ±0.5%.
On the 24 V auxiliary output, X2 and the front terminals share a 2.8 A limit. When tracing field power for S5 digital input modules and S5 digital output modules, use the cabinet drawing to see which loads share that output. The front test sockets marked 3 V = 40 A are for monitoring main rail current.
Fan and battery indications
The 5V o.k., 15V o.k. and 24V o.k. LEDs indicate the state of the three outputs. A failed fan lights its corresponding red LED. Check the Fan Warning and Fan Alarm relays when investigating fan faults or poor airflow. If an expansion rack went down at the same time, record the S5 interface module indications alongside the power supply LEDs.
MB low flags the main backup battery and RB low flags the rechargeable battery. The external backup battery input is rated at 4.5 V DC. Before planned service, identify the S5 memory card type and confirm that a program backup is available.
Editor’s note
Record the nameplates and selector position. Photograph the rack label, the 3LF41 label and the 120/230 V setting. If the panel resembles a 3LF44 or 3LF42, check the full order number before selecting a spare.
Trace the supply when every output LED is dark. Have qualified maintenance staff check the incoming supply, selector position and EN enable circuit against the cabinet drawing. Record the markings on the S5 cables and connectors before removal.
Check the filter when a fan alarm appears. Note which fan LED is lit and whether the alarm starts after the cabinet warms up. Use the manual’s alarm table to assess the filter, air path and condition of the fans together.
Verify the program backup before replacement. As the Siemens S5 PLC returns to service, check the power supply LEDs, battery warnings and CPU status separately.
Ask for a load test in a compatible rack when buying used. The record should show all three output voltages, the loads applied and the condition of the fans. Use the S5 hardware and maintenance overview alongside the manual for the installed rack.
OtomasyonAVM resources and PDFs
6ES5 188-3UA21 central controller page · SIMATIC S5 hardware overview and system manuals
OtomasyonAVM S5 PDF archive. The technical references below link to edition 03 of the system manual, which lists the exact 3LF41 order number.
Related topics
3LC41, 18 A AC-input supply · 3NF41, 40 A DC-input supply · 3LF42 and its rack assignment
S5 navigation
Siemens S5 PLC · SIMATIC S5 · S5 power supplies · S5 racks
External references
Siemens S5-135U/155U system manual, edition 03, rack and power supply assignments (English)