6ES5 955-3NF41

Siemens 6ES5 955-3NF41 SIMATIC S5 PS 955 Power Supply

The Siemens 6ES5 955-3NF41 is a PS 955 rack power supply for SIMATIC S5-135U/155U central controllers and selected EU 185U expansion units. It takes a 24 V DC input (18–33 V DC) and provides a 5.1 V DC / 40 A main rail, plus 15 V DC / 2 A and 24 V DC / 2.8 A auxiliary outputs. Siemens lists this order number for the 6ES5 188-3UA51 central controller and the 6ES5 185-3UA42 expansion unit.

The supply feeds the CPU and modules through the S5 rack backplane. The 6ES5 955-3NC41 also takes 24 V DC and has an 18 A main rail. The 6ES5 955-3LF41 has a 40 A main rail and uses a 120/230 V AC input. Match the input type, output current and rack order number when choosing among S5 power supplies.

Input and output ratings

At rated load and a 24 V DC input, Siemens specifies 20 A input current and a peak inrush of 200 A for 1 ms. The published figures for the 6ES5 955-3NF11 apply to that variant. Use the 3NF41 ratings when checking whether the cabinet supply can handle startup.

The 5.1 V and 15 V rails are regulated. The 24 V output has a tolerance of +25% / −12.5% and a 2.8 A combined limit across the rear X2 connector and the front terminals. Check the auxiliary ratings separately when comparing 18 A rack supplies such as the 6ES5 955-3LC41.

Which central controller and expansion rack take this supply?

Use the rack nameplate to identify the correct power supply for a SIMATIC S5 CPU installation. Siemens lists the 6ES5 188-3UA11 and 6ES5 188-3UA21 central controllers with other PS 955 variants. The same manual edition pairs the 6ES5 183-3UA22 expansion unit with the 3NC41. The rack codes to look for with the 3NF41 are 188-3UA51 and 185-3UA42.

A loss of rack power can take S5 expansion modules and rack interface modules offline together. If several modules drop out at once, check the shared rack supply. Siemens lists the 6ES5 955-3NF42 with the 188-3UA52 and 185-3UA43 in edition 07 of the system manual.

What does the front panel tell you?

The front panel has status LEDs for the 5 V, 15 V and 24 V outputs and separate fault indicators for Fan 1, Fan 2 and Fan 3. RB low refers to the rechargeable backup battery. MB low refers to the main backup battery. If several faults appear together, use the Siemens S5 system overview and the rack power indicators to trace the fault to the affected rack.

The front-panel current test point for the 5 V rail is scaled at 3 V = 40 A. The voltage at that point represents load current on the rail. If the 5 V rail shows a fault, record the CPU startup state and check the status of the S5 memory modules as well.

Editor's note

Read the full suffix. The 6ES5 955-3NC42 also takes a 24 V DC input and is rated at 18 A. Compare front-panel photographs of the old and replacement units with both order numbers visible.

Photograph the rack nameplate as well. Other EU 185U configurations include the 6ES5 185-3UA11. Keep the rack label and the removed supply label together in the service record before ordering.

Check the DC input at startup. If the rack drops out as it starts, have a qualified technician check the voltage at the 24 V input and inspect the upstream connections. AC-input models such as the 6ES5 955-3LF42 have their own input specifications.

Record the fan fault before removing the unit. Note which fan LED is on and whether the airflow path is clear. The Siemens ST 50 catalog lists the 6ES5 988-3NB41 spare fan for this power supply family. Isolate the supply before removal and record the jumper positions where fitted.

Verify the program backup and battery condition separately. Confirm that a program backup is available and that the rack backup battery is serviceable. Follow section 4.3 of the S5-135U/155U system manual below for the power supply replacement sequence.

Ask how a used unit was tested. For a used Siemens automation offer, ask for a clear nameplate photo and test results covering the 5 V rail under load, all three fans and the warning indicators. To offer a unit for sale, email its full order number, quantity, condition, nameplate photo and asking price to otomasyonavm@gmail.com.

OtomasyonAVM resources and PDFs

Siemens SIMATIC S5 PLC pages and PS 955 power supply models

Siemens S5 PLC overview and manual links

SIMATIC S5-115 PDF files (OtomasyonAVM library, S5-115 family)

Related topics

6ES5 955-3NC41 · 24 V DC input, 18 A and 6ES5 955-3LF41 · AC input, 40 A

6ES5 955-3NF42 · PS 955 40 A variant and SIMATIC S5 racks

Browse the S5 range

S5 power supplies › Siemens SIMATIC S5 PLC

External references

Siemens SIMATIC S5-135U/155U system manual, rack assignment, p. 4-21

Siemens SIMATIC S5-135U/155U system manual, 3NF41 technical data, pp. 4-57–4-59

Siemens SIMATIC S5-135U/155U system manual, edition 07, 3NF42 rack assignment

Siemens ST 50 catalog, PS 955 and spare fan ordering data, p. 4/155

UL E143289 listing for 6ES5955-3NF41, Siemens archive