Delta AS02PU-A
Delta AS02PU-A 2-axis differential positioning module
The Delta AS02PU-A is a positioning module in the Delta AS specialty module range. It provides 5 V-class differential pulse outputs for two axes at up to 200 kHz. Typical applications include feed, cutting and positioning axes with pulse-command servo drives.
Pulse outputs and encoder input
Four differential output pairs serve the two axes. Match the selected output mode, such as pulse + direction or CW/CCW, to the drive settings. Delta’s instruction sheet shows an ASDA-A2 example. Check the pulse input and terminal layout for the exact drive model.
The module has one A/B/Z differential encoder channel rated up to 200 kHz. The hardware manual lists 5–24 V DC for this channel. X0.0–X0.4 are five separate 24 V DC, 5 mA digital inputs rated up to 1 kHz. The AS04PU-A provides four axes with NPN open-collector outputs up to 100 kHz. Check both the axis count and the drive input circuit when replacing a module.
CPU selection and ISPSoft
Verify the exact CPU and firmware version for an AS200 or AS300 project. Delta’s setup example uses an AS332P-A. In ISPSoft, add the module in its physical position in HWCONFIG. Connect through COMMGR using a cable suited to the CPU port. Read the module’s start address from the project mapping.
PDFs and technical documents
The general AS manual is listed as D06 under OtomasyonAVM PLC accessories files. Chapter 12 of Delta’s module manual covers AS02PU-A wiring and HWCONFIG. Instruction sheet 5014071402 includes English and Turkish installation information.
Editor's Note
For a used module, ask for a clear photo of the 02PU label and both removable terminal blocks.
Record the module order and back up the HWCONFIG settings before removal.
Use the diagram to verify differential pair polarity and the servo cable shield connection.
Verify the output pulses and encoder count direction before enabling the drive.
During the first safe motion test, use low speed to check direction, limits and homing separately.
Related topics
AS expansion modules · Digital I/O · AS power supplies · Servo drives · Servo motors · Servo manuals
Delta AS PLC series · Delta PLC main category · Used Delta equipment
External references
AS module manual, Chapter 12 (EN) · AS hardware manual, Section 2.6 (EN) · AS02PU-A / AS04PU-A instruction sheet (EN and TR included)