Delta AS16AP11T-A
Delta AS16AP11T-A digital I/O module
Delta AS16AP11T-A is a digital I/O module for Delta AS PLCs with 8 digital inputs and 8 NPN sinking transistor outputs. The inputs are rated 24 V DC and 4.2 mA in the 2024 module manual. The output circuit operates at 5–30 V DC. The resistive load limits are 0.5 A per output and 4 A per common.
S/S and C0 wiring
Wire the S/S input common for the sensor type. For the NPN outputs, connect C0 to the load supply’s 0 V and the load between +V and the output. Budget current separately for the AS power supply and field loads. Follow Delta’s protection diagram for inductive loads.
PLC configuration
In AS200 and AS300 projects, add the module in physical order in ISPSoft HWCONFIG. After connecting with COMMGR, check the assigned X and Y addresses. For remote I/O with AS00SCM-A, check the supported card, network and firmware in the manual.
Editor’s Note
Check for the full AS16AP11T-A code when buying used.
Inspect the spring-clamp terminals and side connector.
Identify the S/S input common and C0 output common on the diagram.
On the bench, verify one input at its LED and X address.
Check one output with a suitable DC test load.
PDFs and related models
AS PLC PDF files · AS hardware manual (EN)
AS16AP11P-A has PNP outputs. AS16AP11R-A has relay outputs.
AS08AN01T-A · AS16AN01T-A · AS16AM10N-A · AS32AN02T-A
More Delta pages AS expansion modules · PLC accessories · Delta PLC · Used Delta products
External references Installation sheet (TR/EN) · Delta module manual (EN, §2.4.10)