Delta AHCPU501-RS2
Delta AHCPU501-RS2 – 48K-Step AH500 PLC CPU with Dual Serial Ports
The Delta AHCPU501-RS2 is a modular CPU in the Delta AH500 series with 48K steps of program capacity and two built-in serial ports. It supports up to 768 physical I/O points through I/O modules on the main rack. It suits single-rack machine panels that communicate with HMIs, drives and measuring instruments over serial links.
Program Capacity and Rack Limits
The AHCPU501-RS2 supports up to 12 modules on one main backplane. It has no extension backplane support, so select the AH modules to fit the main rack’s slots and power budget. The D and L register areas each hold 24,576 words.
The AHCPU500-RS2 also supports 768 physical I/O points and has 32K steps of program capacity. The AHCPU501-RS2 offers 48K steps at the same I/O limit. For one extension rack, see the AHCPU511-RS2. For built-in Ethernet, see the AHCPU501-EN, which provides Ethernet and one serial port.
COM1, COM2 and Programming
Front-panel COM1 and COM2 use DB9 connectors. Each port can be configured for RS-232, RS-422 or RS-485. For Modbus devices, match the RTU or ASCII mode to the connected device. On an RS-485 network, check the port mode, device address and serial settings together. See the AH10SCM-5A for additional serial ports.
Open the project in ISPSoft and configure the PC connection through COMMGR. For bench programming, use a data-capable Mini USB (USB Mini-B) cable. Verify the full CPU model and module order in HWCONFIG. The CPU’s SD card slot can store a project backup on a supported card.
Editor’s Note
When buying used, check the label for the full AHCPU501-RS2 code. Inspect the COM1, COM2 and Mini USB sockets.
On the bench, connect over Mini USB first and read the CPU model and firmware version.
Test both serial ports individually. Use the manual to confirm the selected RS mode and the cable’s DB9 pinout.
Before replacing a CPU in the field, back up the program, rack layout and settings for both ports.
If the CPU runs but the HMI receives no data, start with the COM port, station address, baud rate and parity.
User Manual and PDF Files
AHCPU501-RS2 Hardware and Operation Manual – English PDF. See printed page 1-2 for the model table and 4-29 for the DB9 and Mini USB pinouts. For other documents in the series, see Delta AH PLC PDF files.
Related Topics
AH digital modules · AH analog modules · AH power supplies · Delta PLC software
Delta Automation · Delta PLC · Delta AH PLC series
External reference · Delta AH500 Hardware and Operation Manual