6ES5 375-1LA21

Siemens SIMATIC S5 6ES5 375-1LA21 16 KB CMOS EPROM Memory Submodule

The Siemens 6ES5 375-1LA21 is a 16 KB CMOS EPROM for program storage in SIMATIC S5 equipment. Siemens lists this 375-series submodule for the S5-100U, including the CPU 103, and in the S5-115U memory table. It uses programming number 412 and BYTE organization.

The EPROM retains the stored program when power is removed. The 375-1LA15 holds 8 KB and the 375-1LA41 holds 32 KB. The 375-0LA21 also holds 16 KB and uses programming number 12. Read the 0LA21 or 1LA21 suffix before choosing a setting on the programmer.

CPU and system compatibility

The S5-100U ordering table lists the 1LA21 as an 8,192-statement EPROM for the CPU 100, CPU 102 and CPU 103 family. That figure describes the submodule capacity. Check the program size and usable memory against the installed CPU.

The S5-95U manual lists the 16 KB 1LA21 for the relevant systems, including the 095-8MA04 basic unit and 095-8MB03 SINEC L2 version. Table 2-8 in the S5-115U manual marks the CPU 941, 942, 943 and 944 versions covered by that edition.

Siemens specifies two memory submodules with identical order numbers for the S5-95F. The S5-115F manual also lists the 1LA21 among the program memory submodules for safety mode. Follow the manual for the installed controller when matching modules and carrying out commissioning checks.

What does the CP 521 store on it?

Among the S5 communications modules, the CP 521 SI uses the EPROM for message texts or parameter data. The CP 521 BASIC can store a BASIC program or initialization parameters. Both manuals list this order number as 2 × 8 KB.

The CP 521 BASIC manual also lists the 375-0LC41 EEPROM and 375-0LD21 RAM as 2 × 8 KB. The EEPROM is electrically erasable and the RAM provides writable working memory. Match the memory type and contents as well as the capacity when selecting a spare.

Reading and programming the EPROM

Use a compatible SIMATIC S5 programming device and select 412 / BYTE to read the EPROM. Table 2-8 in the older S5-115U manual shows 12 against the 1LA21. The Siemens S5-95F, S5-115F and CP 521 SI tables assign 412 to the 1LA21 and 12 to the 0LA21.

Save the existing contents to a file and compare the programmed module with the source file afterward. Use a suitable eraser and run a blank check before reprogramming this UV-erasable EPROM. If you also need an online backup from the running CPU, check the S5 PG connection.

Editor’s note

Photograph the label. Check the 375-1LA21 order number and 16 KB capacity together.

Record the full CPU or CP order number and the memory socket. Isolate the equipment supply before removing or fitting the submodule.

Keep the EPROM contents and the backup from the running CPU in separate files. The EPROM copy may predate later online program changes.

When replacing a submodule in an S5-95F, compare both submodule order numbers and follow the Siemens commissioning checks for that controller.

When buying a used submodule, ask for a read test with programming number 412 and a blank check if needed. Record the machine and application a CP submodule came from.

OtomasyonAVM resources and PDFs

+ SIMATIC S5 memory submodules · Siemens SIMATIC S5 PLC overview

+ SIMATIC S5 PDF archive and system manuals

Related topics

+ 6ES5 375-1LA15 8 KB CMOS EPROM · 6ES5 375-1LA41 32 KB CMOS EPROM · 6ES5 375-0LA21 16 KB EPROM

S5 navigation

+ S5 memory cards · SIMATIC S5 · Siemens S5 PLC

External references

+ Siemens S5-95F manual · EPROM table and paired submodules

+ Siemens S5-100U system manual · CPU memory accessories

+ Siemens S5-115U system manual · Table 2-8, CPU compatibility

+ Siemens S5-115F manual · Memory submodules for safety mode

+ Siemens CP 521 SI manual · Memory submodules and programming numbers

+ Siemens CP 521 BASIC manual · EPROM, EEPROM and RAM