Delta UC-MS030-06A

Delta UC-MS030-06A PLC–HMI RS-232 Communication Cable

Delta UC-MS030-06A is a 3-metre RS-232 communication cable for connecting a PLC and an operator panel. Its ends are an 8-pin male mini-DIN and a male DB9 connector. It belongs to Delta DVP communication cables and Delta PLC accessories. The manufacturer's PLC/HMI cable selection guide identifies it in Figure 4.

PLC and HMI connections

The mini-DIN end connects to a suitable PLC RS-232 port; the male DB9 end connects to the female DB9 RS-232 HMI port specified for this cable. When selecting within Delta DVP PLCs and Delta DOP-100, verify the complete device model, COM port and pin assignment. A DB9 housing can carry different signals on different ports.

Figure 4 pin assignments

The manufacturer's principal signal connections are mini-DIN pin 4 ↔ DB9 pin 3, mini-DIN pin 5 ↔ DB9 pin 2 and mini-DIN pin 8 ↔ DB9 pin 5. These connect the receive/transmit signals and signal ground.

The drawing also shows DB9-side links between pins 7–8 and pins 1–4–6. Do not treat the cable as a simple pin-for-pin extension. Distinguish the contact-face view from the solder-side view when measuring and follow the numbered drawing.

Differences from related UC-MS cables

UC-MS020-06A is the 2-metre option with the same connector types. UC-MS030-01A is also 3 metres long but has a female DB9 end. UC-MS020-01A and UC-MS010-02A also belong to the female-DB9 group. Check length and connector gender separately.

UC-PRG030-10A is a different serial cable with two DB9 ends. UC-PRG020-12A serves a USB/serial connection task. When choosing Delta DVP programming cables for a PC connection, establish the port standard, connector type and any required conversion.

Communication settings and software

No software or driver is installed in UC-MS030-06A itself. Select WPLSoft or ISPSoft according to CPU support, and prepare the HMI project with the tool supported by the panel. If a separate USB-to-RS-232 converter is used, any converter driver requirement belongs to that device.

Match the PLC and panel's baud rate, data bits, parity, stop bits and protocol. Also check the device address and register area selected by the HMI driver. Modbus RTU and Modbus ASCII selection belongs to the endpoint devices; the cable does not convert protocols or electrical standards.

Editor's Note

Specify the complete UC-MS030-06A code when ordering. The equally long 01A cable has a female DB9 end. Check the actual device socket before choosing a cable by appearance.

Disconnect the cable from both devices before continuity testing. Check the 4–3, 5–2 and 8–5 connections, then the DB9 links shown in the drawing. Intended links between pins are not short-circuit faults.

Gently move the cable near each connector while measuring. Broken conductors or loose contacts may remain hidden when the cable is stationary. Inspect mini-DIN pins for bending or displacement and check the connector housing for cracks.

If the cable passes inspection but the panel cannot communicate, verify the selected COM port and RS-232 mode first. Then check baud rate, data format, HMI driver and addresses in sequence. Change one setting at a time.

Avoid long parallel routing in the same bundle as a drive's motor-output cable and support the cable to prevent connector strain. Where possible, test a used cable by establishing stable communication between a suitable PLC and HMI.

PDF and wiring documentation

Use Delta PLC accessories files for the Figure 4 drawing and cable selection documents. Consult Delta PLC and HMI manuals for the PLC port and Delta HMI files for panel COM connections. Match the complete endpoint model numbers as well as the cable code.

Related topics

Delta UC-MS020-06A · Delta UC-MS030-01A · RS-232, RS-422 and RS-485 differences · Delta DVP communication cables

Return to Delta PLC accessories. Browse controllers in the Delta PLC category and available devices under second-hand Delta products.

External references: Delta PLC/HMI Cable Selection Guide — Figure 4, page 1-82 (archived manufacturer document) · Delta Download Center