Delta UC-MS010-02A

Delta UC-MS010-02A — 1 m RS-232 Communication Cable

Delta UC-MS010-02A is a 1-metre RS-232 cable with a right-angle, 8-pin male mini-DIN connector and a female DB9 connector. It belongs to the Delta DVP communication cables range. The catalogue lists PLC-to-PC use, while suitable panel-to-PLC applications are also documented.

Applications and connection selection

Delta’s TP02G-AS1 and TP04G-AS2 instruction sheets show UC-MS010-02A between a DVP PLC and the panel’s COM1 RS-232 port. Verify the exact PLC, panel interface and communication settings together. Review DVP PLC series and TP panels and remote I/O to distinguish the different hardware within these ranges.

Main signal connections

8-pin male mini-DIN Female DB9 Function
4 — Rx3 — TxData from DB9 to mini-DIN
5 — Tx2 — RxData from mini-DIN to DB9
8 — GND5 — GNDSignal reference

The manufacturer drawing also shows DB9 links between 7–8 and 1–4–6. Mini-DIN pins 1 and 2 are labelled +5 V; those labels do not establish that the cable powers the PLC or panel. Use the complete drawing when preparing a cable, including the connector links.

Differences from related UC-MS cables

Model Length DB9 end Mini-DIN end
UC-MS010-02A1 mFemaleRight-angle male
UC-MS020-01A2 mFemaleStraight male
UC-MS030-01A3 mFemaleStraight male
UC-MS020-06A2 mMaleStraight male
UC-MS030-06A3 mMaleStraight male

Check DB9 connector gender and cable exit direction as well as length. A right-angle connector can help with cabinet clearance, but verify that it does not press against adjacent terminals or covers. Adding a gender adapter alone does not establish full electrical compatibility.

Computer connection and software

The computer requires a suitable RS-232 serial port. If a USB-only computer uses a USB/RS-232 converter, the driver and COM-port settings belong to that converter. USB programming options such as UC-PRG020-12A can be reviewed separately under DVP programming cables.

For a supported PLC application, check WPLSoft, ISPSoft and COMMGR settings as applicable. Match the interface, baud rate, parity, data/stop bits and device address to the target hardware. Connecting the cable does not automatically match these settings.

For a TP panel, also verify the device driver, selected port and register addresses in the TPEditor project. Transferring a project from the computer and reading PLC data from the panel are separate connection steps. Identify the two devices the cable will connect before selecting it.

Editor’s Note

Check both equipment ports first. An eight-pin socket that looks suitable is not enough. Verify the model code, RS-232 interface and female DB9 end together before connecting the cable.

A right-angle mini-DIN helps in confined spaces, but the wrong cable direction can place constant strain on the socket. Check the fitted connector together with the cover and neighbouring cables. Disconnect by holding the connector body rather than pulling the cable.

With the cable disconnected, check continuity for 4–3, 5–2 and 8–5 first. Then check the DB9 links and unintended shorts. Gently moving the cable near each connector during measurement can help reveal an intermittent break.

Confirm whether pin numbers are shown from the connector face or solder side. A mirrored view can lead to incorrect wiring. Do not test the data pins by applying an external 5 V or 24 V supply.

If communication fails, change one item at a time. Check the COM port first, then the serial format and device address. Reading a known register from suitable test equipment gives a clearer result than changing settings at random.

For a used cable, inspect bent mini-DIN pins, loose DB9 screws and damage near the connector entries. Request a real data-reading test after continuity checks. Begin with reading values on an operating machine rather than clearing programs or writing data in bulk.

PDF, software and related topics

Use the Delta PLC accessories PDF and software files page for the cable selection guide and software links. Panel documentation is under Delta TP panel files. Further sources are available under PLC and HMI manuals and Delta user manuals.

Navigation: UC-MS010-02A main page · Delta PLC accessories · Delta PLC models · Used Delta products

External references

Delta PLC/HMI Cable Selection Guide — 1-80, Figure 1 · Delta DVP / TP Catalogue — Accessories · Delta TP02G-AS1 Instruction Sheet — Communication Connection · Delta TP04G-AS2 Instruction Sheet — Communication Connection