Delta AH04PT-5A
Delta AH04PT-5A – 4-Channel RTD Temperature Input Module
The Delta AH04PT-5A is an RTD input module for monitoring four temperature points on a Delta AH500 PLC rack. It supports Pt100, Pt1000, Ni100 and Ni1000 sensors with 2-, 3- or 4-wire connections. It also offers a 0–300 Ω resistance measurement mode. Typical applications include monitoring heating zones, tanks and machine temperatures.
Resolution and conversion time
Temperature resolution is 0.1 °C / 0.1 °F (16-bit). The module converts inputs in 150 ms per channel with 2- or 4-wire connections and 300 ms per channel with 3-wire connections. See What is Pt100? and Pt100 vs thermocouple for help choosing a sensor.
ISPSoft configuration and wiring
Check the rack and slot in HWCONFIG in ISPSoft. Match the channel mode to the sensor type and lead count, then verify the temperature unit and PLC input addresses. Follow the model wiring diagram for jumper placement on the removable terminal block. To check the rack configuration, see AH expansion modules and AH power supplies.
Instruction sheet and PDF archive
The AH04PT-5A instruction sheet (PDF) includes English and Turkish sections. The two-page document covers mounting, dimensions, terminal layout and 2-, 3- and 4-wire RTD diagrams. See Delta AH PLC PDF files for other documents in the series.
Editor's Note
When buying a used module, start with the AH04PT-5A label and the 04PT marking on the front.
Check that the removable terminal block and its latch are present.
If possible, test all four channels with a reference Pt100 sensor or RTD simulator before accepting the unit.
If the reading has a steady offset, check the sensor type, lead count and terminal jumpers. If the reading jumps intermittently, check for loose terminals and sensor wiring routed alongside drive output cables.
Record the HWCONFIG channel settings and PLC input addresses before replacing the module. After replacement, compare the displayed temperature with a reference reading.
Related topics
The AH08PTG-5A is an eight-channel RTD module with channel isolation. The AH04TC-5A and AH08TC-5A accept thermocouple inputs. For voltage and current inputs, see Delta AH analog modules.
The Delta AS04RTD-A and Delta DVP04PT-S are RTD modules for their respective PLC families. The Derell DESP-99-RS-A provides standalone, single-point panel control. See also What is PID? and custom Pt100 sensors.
Delta AH PLC series · Delta PLC · Delta PLC software · Second-hand Delta equipment
External references
Delta Electronics AH04PT-5A instruction sheet · Delta AH Series catalogue, English