Yaskawa Sigma-5 EtherCAT / Indexer

EtherCAT and Indexer options perform different jobs: one is a network interface, the other local positioning functionality. Choose by the actual control requirement.

Network command or local position sequence?

With EtherCAT, motion commands arrive from a networked controller. An Indexer can instead execute stored positions and trigger conditions locally at the drive. Their appearance in one options list does not make them two names for the same job.

Identify which device issues movement commands in the running machine. Then look for the relevant I/O triggers, network cycle or position-program backup. Physical fit of an option card does not restore missing application logic.

What matters in selection

EtherCAT carries commands over a network; an Indexer runs local position sequences at the drive. Establish whether the controller or a drive-resident program owns the move before choosing an option.

If a local position sequence is needed, read the Indexer function in Yaskawa Safety / Feedback / Indexer separately from the network option.

Technical references: Sigma-5 Rotary Setup Manual.

Models and technical distinctions

For shortened designations such as SGDV-… / EtherCAT: A shortened part code may omit the two endpoints or the full length variant.

Model / frameDocumented distinction
SGDV-… / EtherCATEtherCAT application; communication and motor feedback remain separate checks.

Which tool serves which task?

What works with this component?