Yaskawa SigmaWin+ 5 and Legacy Versions

SigmaWin+ 5 supports parameter reading, monitoring, tuning and backup across supported older Sigma generations. The JZSP-WP002 / 5.75 record and the earlier JZSP-WP0001 reference belong to different historical releases, not one interchangeable installer.

Begin by reading and saving the existing parameters. Writing a project that does not match the drive revision, motor and encoder can change motion behavior and protective settings.

Practical workflow and cautions

A usable backup is more than one saved file: retain the exact drive code, software release, connected motor and feedback identity in the same service record. That context helps prevent parameters from another machine being restored after a failure.

Speed, torque and alarm traces are useful diagnostics, not proof that a tuning file is safe for a changed mechanical load. Review gains again when the duty cycle changes. This page explains the tool; it does not promise a currently supported installer or operating system.

Connecting to an older axis

If the service PC holds several SigmaWin releases, record the drive generation and connection hardware before opening a project. A file in the archive is not automatically identical to the settings read online: date, machine identity and motor code may differ. Read and back up first, then assess the effect of any proposed change.

Related hardware

For a legacy Sigma project, record both drive generation and the complete connected motor identity.

A different software task

Compare the document scope in SERVOPACK drive manuals when matching this tool to the drive generation.