Yaskawa Servo Drive and System Families
The SERVOPACK powers the motor and regulates current in response to motion commands. Two units with similar output labels can still differ in supply, command interface or feedback generation. This section separates Sigma generations and legacy drive families without treating the drive as a motor specification.
What the drive label leaves out
A SERVOPACK nameplate can identify its electrical capacity without explaining how the machine commands it. The axis may receive pulse commands, an analogue reference or targets over a servo network. Before replacement, record controller wiring, motor cable and encoder connector with the cable labels; matching only the power figure is not enough.
What matters in selection
Do not select a drive from motor wattage alone. Compare supply, continuous output current, command input and motor-feedback generation in the same machine installation.
To understand the load behind the drive rating, use the torque and inertia discussion in Yaskawa Servo Motors.
Technical references: Sigma-5 Rotary Setup Manual; Sigma-7 European catalog — V1_1215. For this family, use SERVOPACK drive manuals to identify the relevant document.
Models and technical distinctions
For shortened designations such as SGDV-…D…: Family-level codes in this table are not complete device order numbers.
| Model / frame | Documented distinction |
|---|---|
| SGDV-…D… | 400 V Sigma-5 family designation; capacity, command interface and complete order suffix are not defined by this shortened code. |
| SGDV / yüksek güç | High-power Sigma-5 branch; select motor and supply pairing separately from the smaller standard frames. |
| SGD7S / SGD7W — 400 V | 400 V Sigma-7 single/dual-axis family; the period brochure announcement is not a rating label for a specific device variant. |