Yaskawa Linear and Torque Motors

A linear motor produces straight-line thrust, while a direct-drive rotary motor acts at a rotating shaft without a gearbox in between. They solve different mechanical problems, and thrust is not a substitute for torque. Use this branch to reach Yaskawa linear and direct-drive families.

Which motor suits which motion?

A carriage moving back and forth along a straight guide calls for linear thrust and usable travel. A rotary table positioned directly at its shaft calls for torque, motor diameter and suitable bearing arrangements. Both need feedback and a servo drive, but the mechanical selection questions are different.

Keep units distinct when comparing family ratings: a linear motor produces force in newtons; a rotary direct-drive motor produces torque in newton-metres. Neither headline figure replaces a calculation based on load mass or rotational inertia.

Two applications, two selection paths

For a camera travelling along a long carriage, start with usable stroke, magnet-track layout and position scale. For an indexing table, begin with rotating inertia, table diameter and continuous torque. Both machines may be called servo applications, but one family’s thrust chart cannot be compared directly with the other’s torque chart.

Where to start

What matters in selection

Use the linear branch for straight-line thrust and the direct-drive branch for torque at a rotating load. Force in newtons and torque in newton-metres answer different mechanical questions.

For a straight-line axis, Yaskawa Linear Servo distinguishes the moving motor section from its magnet track.

Documentation for Yaskawa Linear and Torque Motors depends on the full device code; the relevant manual guide separates motor and drive references.

What works with this component?


Refine Search