Yaskawa Servo Modules and Accessories
A small supporting part can stop an entire servo axis. Encoder cables, terminals, application cards and safety options each do a different job. Identify both connection endpoints, supported drive generation and actual function before comparing part numbers.
Why a small part can stop the axis
A failed feedback cable can prevent the drive from reading position even when the motor is healthy. An Indexer card is not a feedback lead; it adds motion-sequence functionality. When tracing a part, record its function, both connection ends and the drive generation rather than filing everything under a broad accessories label.
What matters in selection
Before selecting a cable or option card, identify both connection endpoints and the function carried between them. Similar connectors can serve different signal, power or safety roles.
For feedback leads and terminals in particular, Yaskawa Encoder / Terminal / Cable follows both ends of the connection.
Technical references: Sigma-5 Rotary Setup Manual; SGMSH / SGMUH + Sigma II selection sheet; Sigma-7 European catalog — V1_1215; Sigma III SGDS MECHATROLINK-II User Manual.
Models and technical distinctions
For shortened designations such as SGDV-…E1…: Family-level codes in this table are not complete device order numbers.
| Model / frame | Documented distinction |
|---|---|
| SGDV-…E1… | Documented servo-system family designation; verify the exact option suffix and supported system before replacement. |
| JUSP-OP02A-1 | Documented servo-system family designation; verify the exact option suffix and supported system before replacement. |
| JUSP-RA04 | Documented servo-system family designation; verify the exact option suffix and supported system before replacement. |
| SGDV-OCA□□A | Documented servo-system family designation; verify the exact option suffix and supported system before replacement. |
| JUSP-OP05A | Documented servo-system family designation; verify the exact option suffix and supported system before replacement. |
| JZSP-CHF08-1 | Documented servo-system family designation; verify the exact option suffix and supported system before replacement. |
| JZSP-CHF08-2 | Documented servo-system family designation; verify the exact option suffix and supported system before replacement. |